Cheers Royce.
| auszookers.com https://auszookers.com/forum/ |
|
| What ratio????? https://auszookers.com/forum/viewtopic.php?f=5&t=10234 |
Page 1 of 1 |
| Author: | want33s [ Sat Mar 06, 2010 2:32 pm ] |
| Post subject: | What ratio????? |
What ratio diffs should a 1990 SWB soft top Vitara G16A manual have? |
|
| Author: | royce [ Sat Mar 06, 2010 2:53 pm ] |
| Post subject: | Re: What ratio????? |
5.12 and will be 22 spline |
|
| Author: | want33s [ Sat Mar 06, 2010 2:55 pm ] |
| Post subject: | Re: What ratio????? |
Cheers Royce.
|
|
| Author: | royce [ Sat Mar 06, 2010 3:12 pm ] |
| Post subject: | Re: What ratio????? |
I dont know that the carby ones had anything but 5.12 really, I think it was only the EFI 4 speed auto things onwards that made it more complex |
|
| Author: | Jester [ Sat Mar 06, 2010 4:27 pm ] |
| Post subject: | Re: What ratio????? |
so even the 3spd auto ones have same diff ratio royce? |
|
| Author: | tanshi [ Sat Mar 06, 2010 4:31 pm ] |
| Post subject: | Re: What ratio????? |
i think the carby auto was 4.6 |
|
| Author: | steak_knife [ Sun Mar 07, 2010 1:58 pm ] |
| Post subject: | Re: What ratio????? |
What are you running now Jas?? 
|
|
| Author: | want33s [ Sun Mar 07, 2010 2:05 pm ] |
| Post subject: | Re: What ratio????? |
Got 3.9 now but want 5.12... You got your PC fixed AGAIN huh? |
|
| Author: | steak_knife [ Sun Mar 07, 2010 5:48 pm ] |
| Post subject: | Re: What ratio????? |
want33s wrote: Got 3.9 now but want 5.12...
You got your PC fixed AGAIN huh? It go's for about 10min's, then has a hissy fit.... 
|
|
| Author: | remydog05 [ Sun Mar 07, 2010 10:04 pm ] |
| Post subject: | Re: What ratio????? |
Can you fit GV Diff gears into a 1.3 sierra center? |
|
| Author: | steak_knife [ Sun Mar 07, 2010 10:35 pm ] |
| Post subject: | Re: What ratio????? |
remydog05 wrote: Can you fit GV Diff gears into a 1.3 sierra center?
Front's only, out of Vit's, the Gv front's will fit but don't have 5.12's. |
|
| Author: | joeblow [ Mon Mar 08, 2010 12:32 am ] |
| Post subject: | Re: What ratio????? |
royce wrote: I dont know that the carby ones had anything but 5.12 really, I think it was only the EFI 4 speed auto things onwards that made it more complex
this again......................... 
carby man vit 5.1, 22 spline front, 26 spline rear, 10 bolt ring gear. carby 3 speed auto as above with 4.6.... and so on..... and so on.... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|