Darren wrote:
I'm going to bolt it to a jimny gearbox with sierra selectors and rear housing the electrical side of things is my concern
Darren
Darren
and so it should be
| auszookers.com https://auszookers.com/forum/ |
|
| M15 into sierra https://auszookers.com/forum/viewtopic.php?f=5&t=10397 |
Page 1 of 1 |
| Author: | Darren [ Fri Mar 12, 2010 8:44 pm ] |
| Post subject: | M15 into sierra |
I am going to put an M15 into a sierra , Has anyone done this ? and what were the major issues Darren |
|
| Author: | Ben_Sierra [ Fri Mar 12, 2010 8:56 pm ] |
| Post subject: | Re: M15 into sierra |
I can tell you now that you will need to do a lot of work to bolt it up to the Sierra gearbox... |
|
| Author: | Darren [ Fri Mar 12, 2010 11:06 pm ] |
| Post subject: | Re: M15 into sierra |
I'm going to bolt it to a jimny gearbox with sierra selectors and rear housing the electrical side of things is my concern Darren |
|
| Author: | Ben_Sierra [ Fri Mar 12, 2010 11:32 pm ] |
| Post subject: | Re: M15 into sierra |
I wouldn't have thought it would be harder than any other EFI conversion, but I don't see why you wouldn't just save a lot of hassle and go the tried and tested G16B... |
|
| Author: | watermouse [ Tue Mar 16, 2010 1:20 am ] |
| Post subject: | Re: M15 into sierra |
All things suggest it is likely to be a bastard of a job but we need trail blazers like darren to just do it and tell us how it goes. Decent G16 engines are getting harder to find but the M series are only going to become more common. You never know, if you have an M series Jimny gearbox and you read about Silo's M18 into Jimny conversion it could be alot less hassle than a straight g16 swap. |
|
| Author: | Fatzook [ Fri Mar 19, 2010 1:44 am ] |
| Post subject: | Re: M15 into sierra |
Darren wrote: I'm going to bolt it to a jimny gearbox with sierra selectors and rear housing the electrical side of things is my concern
Darren and so it should be
|
|
| Author: | Bugsta [ Fri Mar 19, 2010 3:36 am ] |
| Post subject: | Re: M15 into sierra |
Yeah, I like the idea of one day putting an m18 from a Liana into my Jimny. I reckon that thing would rocket! I justy wonder how the rest of the drive train would handle the extra power. |
|
| Author: | BlueSuzy [ Fri Mar 19, 2010 4:10 am ] |
| Post subject: | Re: M15 into sierra |
Is this going to be manual or auto? Manual will be easier. Don't let Fatzook scare you off. He's just had a bad experience or something with 'm' series wiring, or his mum. If you get the complete harness and key to the ignition, you are on the right track. Many people have done the m13a into a sierra. Wiring can be a mess, but once you find out all information about it, it should be ok if your clue'y. |
|
| Author: | Benz [ Sat Mar 20, 2010 5:09 am ] |
| Post subject: | Re: M15 into sierra |
lots of electrics to wire up in a M series engine |
|
| Author: | atari4x4 [ Sat Mar 20, 2010 5:32 am ] |
| Post subject: | Re: M15 into sierra |
Bugsta wrote: Yeah, I like the idea of one day putting an m18 from a Liana into my Jimny.
I reckon that thing would rocket! I justy wonder how the rest of the drive train would handle the extra power. you mean sort of like what silo did? it's the jimny that suzuki should have built!! http://auszookers.com/index.php?name=Fo ... pic&t=9779 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|