want33s wrote:
righty tighty... lefty loosey...
i work on computers all day i use that one a fair bit when i get around to spinning spanners...
| auszookers.com https://auszookers.com/forum/ |
|
| rear pinion flange nut on transfer https://auszookers.com/forum/viewtopic.php?f=5&t=10442 |
Page 1 of 1 |
| Author: | bj1910 [ Mon Mar 15, 2010 7:14 pm ] |
| Post subject: | rear pinion flange nut on transfer |
hi i was wondering weather the rear pinion nut on my 91 wt has normal or reverse thread asit seems really hard to remove compaired to the front ones |
|
| Author: | want33s [ Mon Mar 15, 2010 7:16 pm ] |
| Post subject: | Re: rear pinion flange nut on transfer |
righty tighty... lefty loosey... I usually bolt a length of steel to the flange and then use a breaker bar and socket with a long piece of pipe. |
|
| Author: | Damo [ Mon Mar 15, 2010 7:19 pm ] |
| Post subject: | Re: rear pinion flange nut on transfer |
There are 2 flats machined into the output shaft, and the nut is dented in those locations. That can make it hard to get off. |
|
| Author: | brendan [ Mon Mar 15, 2010 7:19 pm ] |
| Post subject: | Re: rear pinion flange nut on transfer |
rattle gun and some heat |
|
| Author: | bj1910 [ Mon Mar 15, 2010 7:26 pm ] |
| Post subject: | Re: rear pinion flange nut on transfer |
think i might try the welder idea as i do not have an oxy cheers for your input guys now to get it open an put my crawlers in. |
|
| Author: | Ben_Sierra [ Mon Mar 15, 2010 7:44 pm ] |
| Post subject: | Re: rear pinion flange nut on transfer |
I took mine to the local mechanic and he got em off with a rattle gun in 5 seconds flat... |
|
| Author: | atari4x4 [ Mon Mar 15, 2010 8:07 pm ] |
| Post subject: | Re: rear pinion flange nut on transfer |
want33s wrote: righty tighty... lefty loosey...
i work on computers all day i use that one a fair bit when i get around to spinning spanners...
|
|
| Author: | steak_knife [ Mon Mar 15, 2010 8:16 pm ] |
| Post subject: | Re: rear pinion flange nut on transfer |
atari4x4 wrote: want33s wrote: righty tighty... lefty loosey... i work on computers all day i use that one a fair bit when i get around to spinning spanners... I try to teach apprentices that rule to, thay still snap thing tho.. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|