| auszookers.com https://auszookers.com/forum/ |
|
| reinforcing alloy bullbar https://auszookers.com/forum/viewtopic.php?f=5&t=10534 |
Page 1 of 1 |
| Author: | BUZOOKA [ Fri Mar 19, 2010 1:42 am ] |
| Post subject: | reinforcing alloy bullbar |
hey fellas getting a winch for teh zook just wondering wats the best way to reinforce my alloy bar so that it can be used as a winch bar?? i no welding is out of the question for my self as i cant weld alloy just after a few pointers to do to this one till i deside on how to go about making a bar |
|
| Author: | atari4x4 [ Fri Mar 19, 2010 1:57 am ] |
| Post subject: | Re: reinforcing alloy bullbar |
firstly are you serious? you would need to build a winch cradle out of steel that would sit behind the bar & bolt to the chassis & a "shep toobe" inside the front crossmember! or you could just use some pop rivets, tech screws & cable ties personally i would wait for a steel bar to come up, shep had a heap that he sold off way cheap. |
|
| Author: | Bruce [ Fri Mar 19, 2010 2:14 am ] |
| Post subject: | Re: reinforcing alloy bullbar |
Yes it can be done. This is a picture of my old GV (RIP) You are right Atari you need to make a winch cradle out of steel 
Some more pics here as well. http://auszookers.com/index.php?name=Fo ... r&start=20 I might have some close ups if you interested Buzooka? |
|
| Author: | royce [ Fri Mar 19, 2010 2:19 am ] |
| Post subject: | Re: reinforcing alloy bullbar |
Bruce wrote: GV (RIP)
Ass |
|
| Author: | atari4x4 [ Fri Mar 19, 2010 2:20 am ] |
| Post subject: | Re: reinforcing alloy bullbar |
did TJM ever mass produce that bar bruce, i'm liking the high clearance side "wings" i think buzzy just took a one way trip back to tazzy... |
|
| Author: | Bruce [ Fri Mar 19, 2010 2:20 am ] |
| Post subject: | Re: reinforcing alloy bullbar |
Yes it could be your's by now Royce 
Smasher 
|
|
| Author: | Bruce [ Fri Mar 19, 2010 2:22 am ] |
| Post subject: | Re: reinforcing alloy bullbar |
atari4x4 wrote: did TJM ever mass produce that bar bruce, i'm liking the high clearance side "wings"
i think buzzy just took a one way trip back to tazzy... No mate that was a once only made one. It was custom made from a T15 TJM bar and T13 TJM bar. I know the guy that makes TJM bars and he made it for me. It looked great. |
|
| Author: | shep [ Fri Mar 19, 2010 2:25 am ] |
| Post subject: | Re: reinforcing alloy bullbar |
what happened to your GV bruce? did ya bent it or sell it? |
|
| Author: | Bruce [ Fri Mar 19, 2010 2:44 am ] |
| Post subject: | Re: reinforcing alloy bullbar |
shep wrote: what happened to your GV bruce? did ya bent it or sell it?
http://auszookers.com/index.php?name=Fo ... pic&t=1614 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|