| auszookers.com https://auszookers.com/forum/ |
|
| idling high https://auszookers.com/forum/viewtopic.php?f=5&t=10539 |
Page 1 of 1 |
| Author: | runtbase [ Fri Mar 19, 2010 11:22 am ] |
| Post subject: | idling high |
hey i have serria sj80 with a 1.6 efi 16v efi vitara motor. i had the intake manafold off the other day. to get some measurements as i am making a high flow manafold as my zook is turboed . I put it back on with with old gasket with some gasket goo as it looked alright still. And a 2week wait for a new gasket as suzuki spare parts reckons. now it wants 2 idle a bit high could it be a vacume prob make it idle high or will vacume prob just make it idle rough cheers |
|
| Author: | want33s [ Fri Mar 19, 2010 12:22 pm ] |
| Post subject: | Re: idling high |
Sounds like a vacuum leak to me or possibly just the acellerator cable over adjusted. |
|
| Author: | mightymouse [ Fri Mar 19, 2010 1:02 pm ] |
| Post subject: | Re: idling high |
To check if it is a vac leak use some carby clean and spray around where the manifold meets the head, if it is leaking it will idle up while you spray where the leak is. |
|
| Author: | runtbase [ Sat Mar 20, 2010 12:30 pm ] |
| Post subject: | Re: idling high |
want33s wrote: Sounds like a vacuum leak to me or possibly just the acellerator cable over adjusted. nar i cheecked the cable first thats all good its got a bit of slack. cheers anyways wants33
|
|
| Author: | Scrawny [ Sat Mar 20, 2010 2:49 pm ] |
| Post subject: | Re: idling high |
mightymouse wrote: To check if it is a vac leak use some carby clean and spray around where the manifold meets the head, if it is leaking it will idle up while you spray where the leak is.
Carby clean makes it die, you're thinking of ether - rapid start, start ya bastard, etc |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|