http://www.auszookers.com/index.php?nam ... ic&t=10324
i getcha now
| auszookers.com https://auszookers.com/forum/ |
|
| dual transfer?? https://auszookers.com/forum/viewtopic.php?f=5&t=10573 |
Page 1 of 1 |
| Author: | preecy [ Sun Mar 21, 2010 8:52 pm ] |
| Post subject: | dual transfer?? |
hey guys i was going to put a set of reduction gears in my vitara but the gears i brought off a bloke were wrong , so its lead me to think to adapt a sierra t-case to my vitara t-case is it doable and if so can sumone steer me in the right derection and will bolting the 2 if its possiable give me a reduction just with the standard low range gears together from both case's?? any info would be great cheers sam |
|
| Author: | Fluffy [ Sun Mar 21, 2010 8:58 pm ] |
| Post subject: | Re: dual transfer?? |
what was wrong with the gears? |
|
| Author: | preecy [ Sun Mar 21, 2010 9:00 pm ] |
| Post subject: | Re: dual transfer?? |
Fluffy wrote: what was wrong with the gears?
they are the wrong ones for my t-case |
|
| Author: | Fluffy [ Sun Mar 21, 2010 9:01 pm ] |
| Post subject: | Re: dual transfer?? |
how so? |
|
| Author: | Fluffy [ Sun Mar 21, 2010 9:11 pm ] |
| Post subject: | Re: dual transfer?? |
http://www.auszookers.com/index.php?nam ... ic&t=10324 i getcha now
|
|
| Author: | preecy [ Sun Mar 21, 2010 11:20 pm ] |
| Post subject: | Re: dual transfer?? |
Fluffy wrote: http://www.auszookers.com/index.php?name=Forums&file=viewtopic&t=10324
i getcha now yeah lol |
|
| Author: | v.w.dave [ Mon Mar 22, 2010 1:49 am ] |
| Post subject: | Re: dual transfer?? |
Hey mate pm joe blow he will help you out. it can be done but its a lot more messing around then you think. |
|
| Author: | 31zook [ Mon Mar 22, 2010 11:10 am ] |
| Post subject: | Re: dual transfer?? |
joe cut's the case for $850, you have to fab up all the mounts but with the work already done your truck it shouldn't be hard 
|
|
| Author: | jdk81 [ Tue Mar 23, 2010 1:55 am ] |
| Post subject: | Re: dual transfer?? |
Having dual transfer cases could be useful. Possible to use the output for the front diffs on the first transfer case as a PTO. |
|
| Author: | joeblow [ Tue Mar 23, 2010 3:39 am ] |
| Post subject: | Re: dual transfer?? |
not on the ones i do. that part ends up a paper weight. http://www.auszookers.com/index.php?nam ... pic&t=9869 |
|
| Author: | kenn [ Tue Mar 23, 2010 12:32 pm ] |
| Post subject: | Re: dual transfer?? |
joeblow wrote: not on the ones i do. that part ends up a paper weight.
http://www.auszookers.com/index.php?nam ... pic&t=9869 I thought you sent them off to recycling to make more Bourbon cans 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|