Why do you want WARN axles, new ones would be better wouldn't they
Sorry mate, couldn't resist 
| auszookers.com https://auszookers.com/forum/ |
|
| Samuari axels ??? https://auszookers.com/forum/viewtopic.php?f=5&t=10603 |
Page 1 of 1 |
| Author: | IN2DEP [ Mon Mar 22, 2010 11:21 pm ] |
| Post subject: | Samuari axels ??? |
Just a quicky guys Are they the same as the sierras ?? Im looking at buying some warn axels from the US of A, but before i just want to make sure ?? |
|
| Author: | Rusho [ Mon Mar 22, 2010 11:29 pm ] |
| Post subject: | Re: Samuari axels ??? |
Why do you want WARN axles, new ones would be better wouldn't they Sorry mate, couldn't resist
|
|
| Author: | rpmwrx [ Mon Mar 22, 2010 11:54 pm ] |
| Post subject: | Re: Samuari axels ??? |
Do u mean warn hubs? If your looking at new axles & cv's, u can't go past a set of double toughs! Lockedup4x4 brought mine in from the states... Prices are up on their website... If your after the warn hubs they can prob get them2... |
|
| Author: | IN2DEP [ Wed Mar 24, 2010 12:25 am ] |
| Post subject: | Re: Samuari axels ??? |
to be honest i dont know what i want, but i dont know there out there but ill call up lockedup4x4 and see what they can do for me cheers |
|
| Author: | Red89 [ Wed Mar 24, 2010 12:35 am ] |
| Post subject: | Re: Samuari axels ??? |
If you dont know what you want, can I ask why you are looking at getting something ? Do you keep breaking stuff or are you looking at getting bigger tyres or locking the front end ? |
|
| Author: | IN2DEP [ Thu Mar 25, 2010 12:01 am ] |
| Post subject: | Re: Samuari axels ??? |
well my front hubs dont work so i dont weather to get new ones or second hand ones or just book my car in to a shop and get them checked out, maybe nothing is wrong with them just need to make alil love with to em lol |
|
| Author: | Red89 [ Thu Mar 25, 2010 12:13 am ] |
| Post subject: | Re: Samuari axels ??? |
Then as RPM said you need hubs not axles. Are they just stiff or not locking ? If they are just stiff then pull them apart, clean off the rust and dirt and grease them up. |
|
| Author: | atari4x4 [ Thu Mar 25, 2010 12:16 am ] |
| Post subject: | Re: Samuari axels ??? |
this is a good guide on how to rebuild the aisin free wheeling hubs. http://www.off-road.com/offroad/Editori ... ryId=25213 |
|
| Author: | mika [ Thu Mar 25, 2010 12:19 am ] |
| Post subject: | Re: Samuari axels ??? |
Aisin Hub Rebuild |
|
| Author: | IN2DEP [ Mon Apr 05, 2010 12:04 am ] |
| Post subject: | Re: Samuari axels ??? |
Red89 wrote: Then as RPM said you need hubs not axles. Are they just stiff or not locking ? If they are just stiff then pull them apart, clean off the rust and dirt and grease them up.
Sorry mate i dont think your understanding, im looking at buying hubs from the USA (samurai hubs) so i just wanted to know if they are the same as sierra ones ?? But if i can get then cheaper down here from lockedup4x4 i will cheers guys for the help keith 
|
|
| Author: | want33s [ Mon Apr 05, 2010 12:06 am ] |
| Post subject: | Re: Samuari axels ??? |
Why buy WARN or Superwinch hubs from the states when OEM Aisin hubs are stronger and A LOT cheaper...?????? |
|
| Author: | royce [ Mon Apr 05, 2010 12:27 am ] |
| Post subject: | Re: Samuari axels ??? |
yeah them stupid hubs stuff up a lot, I used to have to keep spare springs and rivets in my car when I had em |
|
| Author: | Zook_Fan [ Tue Apr 06, 2010 3:46 am ] |
| Post subject: | Re: Samuari axels ??? |
I hate aisin hubs. In my personal experiece they are shit. I have busted 3 and siezed about that again. There was not a single one left at the wreckers that wasn't siezed. I have AVM hubs now and so far they seem pretty good, the internals look a lot better than the OEM hubs |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|