| auszookers.com https://auszookers.com/forum/ |
|
| 96 coily suspension help https://auszookers.com/forum/viewtopic.php?f=5&t=10648 |
Page 1 of 1 |
| Author: | Murph987 [ Thu Mar 25, 2010 1:18 am ] |
| Post subject: | 96 coily suspension help |
hey all, so i have to pull out my front right suspension (its a coil over strut setup with 2in lift from standard) and i want to know if i will need a spring compressor to get it out. any help would be cool. Cheers, Murph. |
|
| Author: | Rusho [ Thu Mar 25, 2010 1:23 am ] |
| Post subject: | Re: 96 coily suspension help |
It would help a lot if you do. It can be done without but it is a very dodgy exercise |
|
| Author: | rob87 [ Thu Mar 25, 2010 1:42 am ] |
| Post subject: | Re: 96 coily suspension help |
i got a set if u want to buy them lol but i didnt need them when i put my 40mm suspension lift in... just jack it right up and oh get a set of rachet spanners would make the job heaps faster for undoing the top of the struts.... well when u jack it right up there is no load on the spring so you dont have to worry about there being load on it... soo good luck |
|
| Author: | runtbase [ Thu Mar 25, 2010 11:02 am ] |
| Post subject: | Re: 96 coily suspension help |
nar you dont need nothing jack the car up un bolt strut at top of tower then at diff and it will fall out. no special tools needed |
|
| Author: | Ridge [ Thu Mar 25, 2010 5:56 pm ] |
| Post subject: | Re: 96 coily suspension help |
you wont need spring compressors to get the spring out. put the car on chassis stands and have a jack under the diff, when you undo the nuts and bolts for the strut tower, you can lower the jack under the diff and the strut will come out. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|