| auszookers.com https://auszookers.com/forum/ |
|
| torque specs for head bolts https://auszookers.com/forum/viewtopic.php?f=5&t=10676 |
Page 1 of 1 |
| Author: | nick.gooding [ Fri Mar 26, 2010 5:51 pm ] |
| Post subject: | torque specs for head bolts |
hey guys in the middle of doing my hed gasket and just wondering if anyone knows what the torque spes are for th 13A head bolts |
|
| Author: | Ben_Sierra [ Fri Mar 26, 2010 6:45 pm ] |
| Post subject: | Re: torque specs for head bolts |
I think it was about 70 N-m from memory when I did mine, but I'll double check for you... |
|
| Author: | Ben_Sierra [ Fri Mar 26, 2010 6:46 pm ] |
| Post subject: | Re: torque specs for head bolts |
From the FSM: 63-70 N-m. |
|
| Author: | Rusho [ Fri Mar 26, 2010 8:17 pm ] |
| Post subject: | Re: torque specs for head bolts |
Yep. Stage it...30,50 then 70 |
|
| Author: | want33s [ Fri Mar 26, 2010 8:26 pm ] |
| Post subject: | Re: torque specs for head bolts |
Torque settings and bolt tightening sequence are usually printed on the head gasket packet. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|