Could the center be out of a vitara
| auszookers.com https://auszookers.com/forum/ |
|
| bolt holes, mounts on diff center? https://auszookers.com/forum/viewtopic.php?f=5&t=10717 |
Page 1 of 1 |
| Author: | Brett [ Sun Mar 28, 2010 7:02 pm ] |
| Post subject: | bolt holes, mounts on diff center? |
what are these mounts for? i haven't seen them on any othere sierra diffs before. its a wt front diff i'm pulling down. just can't work out why they are there. |
|
| Author: | Joe [ Sun Mar 28, 2010 7:09 pm ] |
| Post subject: | Re: bolt holes, mounts on diff center? |
Could the center be out of a vitara
|
|
| Author: | 31zook [ Sun Mar 28, 2010 7:10 pm ] |
| Post subject: | Re: bolt holes, mounts on diff center? |
looks like a high pin turned upside down... no idea..... |
|
| Author: | atari4x4 [ Sun Mar 28, 2010 7:17 pm ] |
| Post subject: | Re: bolt holes, mounts on diff center? |
joseph wrote: Could the center be out of a vitara
200% correct it is the pinion mount for the front diff out of a vitara + it looks like an alloy pinion carrier  ( not the strongest material )
|
|
| Author: | Joe [ Sun Mar 28, 2010 7:18 pm ] |
| Post subject: | Re: bolt holes, mounts on diff center? |
Just had a look at my car its a vit front diff center and no its not turned upside down 
|
|
| Author: | Joe [ Sun Mar 28, 2010 7:19 pm ] |
| Post subject: | Re: bolt holes, mounts on diff center? |
atari4x4 wrote: joseph wrote: Could the center be out of a vitara 200% correct it is the pinion mount for the front diff out of a vitara + it looks like an alloy pinion carrier ( not the strongest material )Damn it i type to slow 
|
|
| Author: | joeblow [ Sun Mar 28, 2010 7:58 pm ] |
| Post subject: | Re: bolt holes, mounts on diff center? |
its a vit centre in its normal position. slap whoever put that in across the head as that housing will not last 10min in a sierra. |
|
| Author: | Brett [ Sun Mar 28, 2010 8:00 pm ] |
| Post subject: | Re: bolt holes, mounts on diff center? |
went and had a closer look and the center looks to be alloy so the center prob has the 5.12 gears or what every they are. it lasted pretty well, the guy i got it of has twisted the diff up and back, was running 33, 6.5 gears... if you have some machanical sympathy you will be shocked how long things last. i'm not saying they are strong just its lasted for him. i wont run one thanks people. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|