auszookers.com
https://auszookers.com/forum/

Spring question
https://auszookers.com/forum/viewtopic.php?f=5&t=10738		 Page 1 of 1
Author:  cbzook [ Mon Mar 29, 2010 2:26 pm ]
Post subject:  Spring question
wondering if jimny springs interchange with sj80 coil springs? wanting to put 4inch or 5 inch lifted springs in my sierra but cant seem to find any anywhere, n i kno u can buy 80mm lifted jimny ones
Author:  BlueSuzy [ Mon Mar 29, 2010 3:41 pm ]
Post subject:  Re: Spring question
You probably can.

But the struts/shocks will not handle it.

And your camber caster on the front will be wayyyyyy out.

You wont fine much over 2" lift as its a shit design with the coilys. This topic has been discussed 1million* times before! :lol:




*Guesstimate.
Author:  Ridge [ Mon Mar 29, 2010 11:05 pm ]
Post subject:  Re: Spring question
you can get a 4 to 5" list with a coily.... most of it wont be with suspension though.

2" body lift, 2" sus + 1" coil spacers

or cut your guards + 2" suspension 3" body lift

definitely reinforce your radial arm mounts and strut towers, or things will break.
Author:  Rusho [ Mon Mar 29, 2010 11:30 pm ]
Post subject:  Re: Spring question
Take a look in here:

http://www.auszookers.com/index.php?nam ... opic&t=402

I think in the end he ran lifted Honda CRV springs and shocks to suit. He parked next to me one day and had a good inch more height than me. I run 2 inch body and spring lift with 30 inch tyres. This is exactly what I will be doing once I have the neccessary pieces together.

Unfortunately for us coily owners struts are a killer...simple fix, piss em off :twisted: Castor correction can be fixed with bushes and custom arms to suit your new suspension setup.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/