| auszookers.com https://auszookers.com/forum/ |
|
| Vitara 5.12 ring and pinion into sierra question https://auszookers.com/forum/viewtopic.php?f=5&t=10769 |
Page 1 of 1 |
| Author: | Joe [ Wed Mar 31, 2010 12:38 am ] |
| Post subject: | Vitara 5.12 ring and pinion into sierra question |
Ok ive sold the 5.12 ring and pinion to a fella that's putting them into his sierra and im not to sure if he would need any of this stuff left over from the center. I spoke to him today on the phone and he mentioned that sierra diffs have a crush tube that the bearings sit on but he wasn't sure if vitaras have the same if so he needs that as well....is there something here that im missing 
Cheers Joe |
|
| Author: | royce [ Wed Mar 31, 2010 12:47 am ] |
| Post subject: | Re: Vitara 5.12 ring and pinion into sierra question |
nope doesnt need it, crush tube is a one off thing so he has to buy a new one regardless |
|
| Author: | Joe [ Wed Mar 31, 2010 12:52 am ] |
| Post subject: | Re: Vitara 5.12 ring and pinion into sierra question |
royce wrote: nope doesnt need it, crush tube is a one off thing so he has to buy a new one regardless
Cool cheers mate 
I like it when simple questions get simple answers like that 
|
|
| Author: | royce [ Wed Mar 31, 2010 1:04 am ] |
| Post subject: | Re: Vitara 5.12 ring and pinion into sierra question |
/waits for simple people joke from TZAR |
|
| Author: | want33s [ Wed Mar 31, 2010 1:50 am ] |
| Post subject: | Re: Vitara 5.12 ring and pinion into sierra question |
Nothing in those pics is needed Joe. |
|
| Author: | Joe [ Wed Mar 31, 2010 2:30 am ] |
| Post subject: | Re: Vitara 5.12 ring and pinion into sierra question |
want33s wrote: Nothing in those pics is needed Joe.
No worry matey once i get the pinion thingy out ill post it off
|
|
| Author: | oozuk [ Wed Mar 31, 2010 10:37 am ] |
| Post subject: | Re: Vitara 5.12 ring and pinion into sierra question |
Make sure you don't remove the pinion bearings off the pinion as you don't want to loose the shim that sets the pinion height |
|
| Author: | Joe [ Thu Apr 01, 2010 2:32 am ] |
| Post subject: | Re: Vitara 5.12 ring and pinion into sierra question |
oozuk wrote: Make sure you don't remove the pinion bearings off the pinion as you don't want to loose the shim that sets the pinion height
Ok ill do my best tried undoing the nut on it today with a socket and no go so need to find a rattle gun 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|