auszookers.com
https://auszookers.com/forum/

Bent diff = stuffed lokka ???
https://auszookers.com/forum/viewtopic.php?f=5&t=10799		 Page 1 of 1
Author:  MrRocky [ Thu Apr 01, 2010 1:26 am ]
Post subject:  Bent diff = stuffed lokka ???
Ok just refitted the lokka to my rear diff for the 3rd time after having suzistore check it over and give it a clean bill of health.
It just slips in and out constantly when accelerating to the point where im waiting for it to explode.
Having accertained that the center is not the problem could it be that my diff housing is so bent that it is causing the problems, it does look a little bit like this /-~\.
Ive pulled that fuuckin diff out 3 times now and its really begining to shit me now.

any idea's ??? :x
Author:  royce [ Thu Apr 01, 2010 1:27 am ]
Post subject:  Re: Bent diff = stuffed lokka ???
clicks while in a straight line? tyres arent even
Author:  joeblow [ Thu Apr 01, 2010 2:06 am ]
Post subject:  Re: Bent diff = stuffed lokka ???
when you have the axles out 'eyeball' down the tube. if it does not look concentric than you may have a bent diff. if not, you have what an auto locker does best. :wink:
Author:  MrRocky [ Thu Apr 01, 2010 12:36 pm ]
Post subject:  Re: Bent diff = stuffed lokka ???
my eyeball skill are failing me as i get older, i might put a level on the tyres when i remove the diff assembly.
Author:  steve [ Thu Apr 01, 2010 2:09 pm ]
Post subject:  Re: Bent diff = stuffed lokka ???
how about measure the wheel track on the bottom of the tyres and measure at the top of the tyres? /--o--\
Author:  MrRocky [ Thu Apr 01, 2010 9:42 pm ]
Post subject:  Re: Bent diff = stuffed lokka ???
measured from the bottom and top lips of the rim and got
124.1 cm for the top
127.5 cm for the bottom

so i guess its official, ive got a bent diff. But would it be causing my drama's with the lokka.
Author:  MrRocky [ Fri Apr 02, 2010 1:02 am ]
Post subject:  Re: Bent diff = stuffed lokka ???
this gives you some idea how bent it is, looking down the diff housing
only half of the opening is visable at the other end...

Image
Author:  Joe [ Fri Apr 02, 2010 1:09 am ]
Post subject:  Re: Bent diff = stuffed lokka ???
8O Yup that's bent.....and dont ya just love the smell of diff oil :roll:
Author:  brodiezook [ Fri Apr 02, 2010 1:16 am ]
Post subject:  Re: Bent diff = stuffed lokka ???
hahaha thats gold :)

this is my NT front diff hahah
Author:  shep [ Fri Apr 02, 2010 1:24 am ]
Post subject:  Re: Bent diff = stuffed lokka ???
how do you do that?
Author:  MrRocky [ Fri Apr 02, 2010 1:32 am ]
Post subject:  Re: Bent diff = stuffed lokka ???
wow, thats impressive mine is bent mainly on the weld near the pumpkin
its not as bad as yours but its pretty close.
Ive been driving every day with it like that for 2 weeks now. haha
Author:  brodiezook [ Fri Apr 02, 2010 1:36 am ]
Post subject:  Re: Bent diff = stuffed lokka ???
haha thats my banana diff thats why i dont dune jump my car anymore aye and i also got the precautions to if i do decide to jump it thats why i got the angle welded all the way across my diff front and rear :)

i have been told from my brothers mate thats works at W.A diffs thatyuo cant really get rid off the clicking noise from the lockers but i got told equal tyre pressures help aswell :)
Author:  MrRocky [ Fri Apr 02, 2010 11:39 pm ]
Post subject:  Re: Bent diff = stuffed lokka ???
man ive had it with this stupid thing, 2 separate shops have given the center the thumbs up, just put a new diff housing in and axles to replace the bent items and it still dont work properly, in fact it was worse than when it was bent.
Can i weld the lockrite together to make a spool or should i just fork out the $$$ and buy one.
Author:  31zook [ Sun Apr 04, 2010 8:05 pm ]
Post subject:  Re: Bent diff = stuffed lokka ???
or save up and buy an airlocker....
Author:  MrRocky [ Sun Apr 04, 2010 9:52 pm ]
Post subject:  Re: Bent diff = stuffed lokka ???
$1200 no friggin way
Author:  alien [ Sun Apr 04, 2010 11:31 pm ]
Post subject:  Re: Bent diff = stuffed lokka ???
nice work on the bending mick =) haha

you should get your new one strengthened - you drive way too hard for standard diffs not to bed - even mine have bent on me and im way gentler than you =P

Airlockers are pretty awesome...

With yours though - have you checked the axles are ok as well? That they didnt also bend?
Author:  MrRocky [ Sun Apr 04, 2010 11:58 pm ]
Post subject:  Re: Bent diff = stuffed lokka ???
yeah axles bent as well so i changed them also and lokka still rooted.
I will get around to strengthening the housing one day, but ive still got another couple in the shed for when i bend em again.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/