These are my bunnings Flares. I don't have any mounting shots, but I just used tec screws. They work fine. Soon to be replaced with bushwackers.
| auszookers.com https://auszookers.com/forum/ |
|
| flares https://auszookers.com/forum/viewtopic.php?f=5&t=10908 |
Page 1 of 1 |
| Author: | jakeyr [ Tue Apr 06, 2010 4:18 pm ] |
| Post subject: | flares |
i got some garden edging from bunnings to use a flares just wondering what is the best way to fit it any advice would be great its on a nt sierra cheers |
|
| Author: | ninjadaniel [ Tue Apr 06, 2010 4:44 pm ] |
| Post subject: | Re: flares |
i would have used rubber flare extensions from clarke rubber. You can buy self drilling "tek" screws from bunings, they work very well. |
|
| Author: | BUZOOKA [ Tue Apr 06, 2010 5:44 pm ] |
| Post subject: | Re: flares |
jakeyr wrote: i got some garden edging from bunnings to use a flares just wondering what is the best way to fit it any advice would be great its on a nt sierra
cheers yer i was actually looking at that my self the other day is the one u got the flexy plastic of it it rubber ??? they only had the platic at my bunnings |
|
| Author: | jakeyr [ Tue Apr 06, 2010 5:57 pm ] |
| Post subject: | Re: flares |
flexy plastic |
|
| Author: | jakeyr [ Tue Apr 06, 2010 6:09 pm ] |
| Post subject: | Re: flares |
anyone got pics |
|
| Author: | lockdup [ Tue Apr 06, 2010 9:24 pm ] |
| Post subject: | Re: flares |
These are my bunnings Flares. I don't have any mounting shots, but I just used tec screws. They work fine. Soon to be replaced with bushwackers.
|
|
| Author: | MacDaddy [ Tue Apr 06, 2010 10:02 pm ] |
| Post subject: | Re: flares |
ninjadaniel wrote: i would have used rubber flare extensions from clarke rubber. You can buy self drilling "tek" screws from bunings, they work very well.
X 2 Clarke rubber have flared guards on a roll, in 50 and 75mm width, not sure if they go bigger, its about $12 per /m...  
|
|
| Author: | BUZOOKA [ Tue Apr 06, 2010 10:34 pm ] |
| Post subject: | Re: flares |
wats the best way to mount there to nt flares as i cant find wt flares any where |
|
| Author: | marcman [ Tue Apr 06, 2010 11:00 pm ] |
| Post subject: | Re: flares |
i was thinkin about doin someting like that, but didnt know where to get the flares from off to clarke rubber. cheers guys |
|
| Author: | neilss [ Tue Apr 06, 2010 11:12 pm ] |
| Post subject: | Re: flares |
BUZOOKA wrote: wats the best way to mount there to nt flares as i cant find wt flares any where
yea will i still be able to just use tek srews to attached the flares as i have a nt with those weak flares |
|
| Author: | BUZOOKA [ Wed Apr 07, 2010 1:39 am ] |
| Post subject: | Re: flares |
neilss wrote: BUZOOKA wrote: wats the best way to mount there to nt flares as i cant find wt flares any where yea will i still be able to just use tek srews to attached the flares as i have a nt with those weak flares bust out the good ol supa glue ill have to look in to taht one u could always just take ur nt flares off and get a nice wde bit of rubber/platic |
|
| Author: | lockdup [ Wed Apr 07, 2010 1:48 am ] |
| Post subject: | Re: flares |
My wt flares will be for sale soon enough |
|
| Author: | zukmeista [ Wed Apr 07, 2010 11:07 am ] |
| Post subject: | Re: flares |
lockdup wrote: My wt flares will be for sale soon enough
Please don't put bushwackers on as it will make you look like a tryhard Jeep homo. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|