| auszookers.com https://auszookers.com/forum/ |
|
| [Vit] "Stabaliser bar" https://auszookers.com/forum/viewtopic.php?f=5&t=10942 |
Page 1 of 1 |
| Author: | Bucket [ Wed Apr 07, 2010 7:16 pm ] |
| Post subject: | [Vit] "Stabaliser bar" |
Do I have to lift my front end up to remove the bar? Read through my manual real quick and it said that you have to lift it till it's aligned with some markings or something, but a few people have said you can do it on the ground. Can you slide the sway bar off the suspension arms without having to remove the bolt? Seems the bolt is also holding the arm to the chassis :s |
|
| Author: | royce [ Wed Apr 07, 2010 8:46 pm ] |
| Post subject: | Re: [Vit] "Stabaliser bar" |
undo the link from teh arm, then the swaybar, I pulled mine off in a paddock the bar will sit where you leave it, mine still in there after 4 years |
|
| Author: | Bucket [ Wed Apr 07, 2010 9:43 pm ] |
| Post subject: | Re: [Vit] "Stabaliser bar" |
so take the ball joints out first so the sway bar moves a bit, then take the nut off the suspension arm bolt and slide swaybar out? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|