| auszookers.com https://auszookers.com/forum/ |
|
| Rebuilding Sierra steering box https://auszookers.com/forum/viewtopic.php?f=5&t=11047 |
Page 1 of 1 |
| Author: | lump_a_charcoal [ Sun Apr 11, 2010 5:29 pm ] |
| Post subject: | Rebuilding Sierra steering box |
Can it be done with basic tools, or is it a shop job? Is there much to replace aside from a couple of seals? Not sure if it is worn, but it has a slight leak. Thanks. |
|
| Author: | Bruce [ Sun Apr 11, 2010 5:33 pm ] |
| Post subject: | Re: Rebuilding Sierra steering box |
PM MRW82. He rebuilds them. |
|
| Author: | 31zook [ Sun Apr 11, 2010 9:05 pm ] |
| Post subject: | Re: Rebuilding Sierra steering box |
i wouldn't of thought them to hard, where would you buy a rebuild kit from? |
|
| Author: | neofitou [ Mon Apr 12, 2010 1:48 am ] |
| Post subject: | Re: Rebuilding Sierra steering box |
if you can find parts it shouldnt be hard, but the suzuki workshop manual says parts are not availiable and for cost effectiveness you should just replace the whole thing (and doesnt have instructions). It wouldnt surprise me if it was just a set of o-rings. I would pull it appart marking and noting the positions of everything (how many turns etc to save adjustment later) and see, but thats me, but I'm sure many many ppl on here have old boxes they arent using as they have put in power steering but kept the old steering box. |
|
| Author: | smileysmoke [ Mon Apr 12, 2010 4:41 pm ] |
| Post subject: | Re: Rebuilding Sierra steering box |
wouldnt the worm drive wear.. i just replaced mine with another secondhand.. when it stuffs up.. another 50 bucks and your off.. |
|
| Author: | Gwagensteve [ Mon Apr 12, 2010 11:03 pm ] |
| Post subject: | Re: Rebuilding Sierra steering box |
Yep, excessive wear is the problem- there's so few parts in a steering box that when the important ones wear out it's going to be a throw it away item. It might be possible to replace the seals, but my guess is that once the seals are gone it's pretty clear the box is on it's way out as it's starting to get excessive play in it. Just my 2C. |
|
| Author: | Brett [ Mon Apr 12, 2010 11:30 pm ] |
| Post subject: | Re: Rebuilding Sierra steering box |
i have a steering box up here as well. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|