auszookers.com
https://auszookers.com/forum/

Indicator Electrics
https://auszookers.com/forum/viewtopic.php?f=5&t=11142
Page 1 of 1

Author:  pyrohamish [ Wed Apr 14, 2010 10:16 pm ]
Post subject:  Indicator Electrics

So I've been playing with the wiring alot, now my indicators wont work, but the will work when hazards are on.

Any ideas as to what I've f**ked up?

Is it possible that I've burnt out one side of the flasher unit or something?

and is there anyway to test what you think is wrong?

Author:  Ben_Sierra [ Wed Apr 14, 2010 10:53 pm ]
Post subject:  Re: Indicator Electrics

I had issues with my indicators not working properly... Was a bad earth. Recheck the wiring where you've been playing with it!

Author:  pyrohamish [ Thu Apr 15, 2010 12:41 am ]
Post subject:  Re: Indicator Electrics

earths are good, I'm confiden about that, all go back to 1 bolt

Author:  Ben_Sierra [ Thu Apr 15, 2010 1:15 am ]
Post subject:  Re: Indicator Electrics

Mine did too, but the connection there was crap...

Author:  jdk81 [ Thu Apr 15, 2010 1:17 am ]
Post subject:  Re: Indicator Electrics

Umm what about your reverse lights?

Hazards are on a diff fuse to the indicators (which are on the same fuse as the reverse lights).

Author:  pyrohamish [ Thu Apr 15, 2010 2:05 am ]
Post subject:  Re: Indicator Electrics

ahh that could be it
What colour wires go to the fuse?

Author:  Benz [ Thu Apr 15, 2010 4:19 am ]
Post subject:  Re: Indicator Electrics

as jdk81 said hazards are on a different fuse. and reverse should be one the same fuse as the indicators =]
so you have blown a fuse.
if its not that then its fault finding time! YAY!

Author:  BlueSuzy [ Thu Apr 15, 2010 4:39 am ]
Post subject:  Re: Indicator Electrics

reverse, i've blown a switch in the gbox, i just swapped switches with another on the gbox.

Like, take the switch out and swap it. not just swap wires :lol:

Author:  jdk81 [ Thu Apr 15, 2010 11:24 am ]
Post subject:  Re: Indicator Electrics

BlueSuzy wrote:
reverse, i've blown a switch in the gbox, i just swapped switches with another on the gbox.

Like, take the switch out and swap it. not just swap wires :lol:


Thats how I found out about the circuits :)

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/