if you don't have access to a press a lenth of pipe works excellent. changed mine just the other work with the pipe cos it was going to take longer to set up the press.
| auszookers.com https://auszookers.com/forum/ |
|
| Wheel Bearings https://auszookers.com/forum/viewtopic.php?f=5&t=11181 |
Page 1 of 1 |
| Author: | lockdup [ Fri Apr 16, 2010 10:07 pm ] |
| Post subject: | Wheel Bearings |
Hey guys, Im after a set of rear Wheel bearings for my WT. I believe Weaves sells them? Also is it a DIY job or am I best to get a mech to do it. Would anybody in Vic with the tools want to do it for some brewskies? |
|
| Author: | 86slowsierra [ Fri Apr 16, 2010 10:13 pm ] |
| Post subject: | Re: Wheel Bearings |
really is a do it your self thing. how ever a hand is good. you only need to do half of this http://www.outerlimits4x4.com/phpBB2/vi ... 94#1256294 you can do it in a hour or 2 easy |
|
| Author: | lockdup [ Fri Apr 16, 2010 10:22 pm ] |
| Post subject: | Re: Wheel Bearings |
I wouldn't mind attempting it but I would need omebody who has done it before to give me a hand Great link |
|
| Author: | kenn [ Fri Apr 16, 2010 11:45 pm ] |
| Post subject: | Re: Wheel Bearings |
Where about's are you? |
|
| Author: | lockdup [ Sat Apr 17, 2010 12:37 am ] |
| Post subject: | Re: Wheel Bearings |
I'm in Narre warren |
|
| Author: | weaves [ Sat Apr 17, 2010 1:30 am ] |
| Post subject: | Re: Wheel Bearings |
I can sort you out with rear wheel bearings, just restocked yesterday. the job is very simple. the tools i use are a mallet, a cold chisel, a grinder and a press. its a very simple job. and if someone who has already done it before is willing to lend a hand, that just makes it extremely easy. just remember, backing plate goes on before you press the bearings on. weaves |
|
| Author: | lockdup [ Sat Apr 17, 2010 1:46 am ] |
| Post subject: | Re: Wheel Bearings |
Weaves can you send me a pm with the price. Also how about fronts. The only tools i have are a mullet and grinder |
|
| Author: | IN2DEP [ Sat Apr 17, 2010 2:31 am ] |
| Post subject: | Re: Wheel Bearings |
bursons auto parts mate, im picking up my zook tomorrow, just got the rear left done lol $160 to get it fitted by my mechanic |
|
| Author: | lockdup [ Sat Apr 17, 2010 5:57 pm ] |
| Post subject: | Re: Wheel Bearings |
I would prefer to watch it be done so I have some no how the next time. Thanks, I also need the rear left done |
|
| Author: | Zook_Fan [ Sat Apr 17, 2010 6:07 pm ] |
| Post subject: | Re: Wheel Bearings |
if you don't have access to a press a lenth of pipe works excellent. changed mine just the other work with the pipe cos it was going to take longer to set up the press.
|
|
| Author: | marcman [ Sat Apr 17, 2010 7:43 pm ] |
| Post subject: | Re: Wheel Bearings |
i did both rears on mine a lil while ago was easy $45 a side dont know if thats cheap or not but i thought it was ok. we used a grinder, socket extension bar (couldn't find a pipe) and a hammer. good times |
|
| Author: | 86slowsierra [ Sat Apr 17, 2010 10:31 pm ] |
| Post subject: | Re: Wheel Bearings |
oops thought you meant front. my bad. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|