| auszookers.com https://auszookers.com/forum/ |
|
| Rocker gear - bolts loose https://auszookers.com/forum/viewtopic.php?f=5&t=11227 |
Page 1 of 1 |
| Author: | Jaffa [ Sun Apr 18, 2010 5:57 pm ] |
| Post subject: | Rocker gear - bolts loose |
I pulled off my rocker cover off this morning and noticed that the 2 rear most bolts holding the rocker gear down were completely wound out!!! (still sitting there) Is this common, or an indication of something else wrong? Engine is a g16 8 valve carby Brendan |
|
| Author: | steak_knife [ Sun Apr 18, 2010 10:46 pm ] |
| Post subject: | Re: Rocker gear - bolts loose |
Jaffa wrote: I pulled off my rocker cover off this morning and noticed that the 2 rear most bolts holding the rocker gear down were completely wound out!!! (still sitting there)
Is this common, or an indication of something else wrong? Engine is a g16 8 valve carby Brendan Yes, it mean's thay need to be tightened 
|
|
| Author: | Jaffa [ Sun Apr 18, 2010 11:59 pm ] |
| Post subject: | Re: Rocker gear - bolts loose |
hahaha, yes I tightened them, also check all the others and they were fine, just the back 2 that had come out. |
|
| Author: | steak_knife [ Mon Apr 19, 2010 1:31 am ] |
| Post subject: | Re: Rocker gear - bolts loose |
It happen's. Got me beat how that stay up there tho, By all account's thay should end up munched in all the lil turning & moveing bit's.  
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|