Junior_91 wrote:
Any pics?
X 2
Need pics !
| auszookers.com https://auszookers.com/forum/ |
|
| help identify these springs https://auszookers.com/forum/viewtopic.php?f=5&t=11231 |
Page 1 of 1 |
| Author: | eldo [ Sun Apr 18, 2010 7:27 pm ] |
| Post subject: | help identify these springs |
i have some second hand springs i got for the lwb, im just trying to work out what brand they are. they have SUZ-01 and SUZ-02 on them in white painted capitals. any ideas guys? |
|
| Author: | eldo [ Sun Apr 18, 2010 7:28 pm ] |
| Post subject: | Re: help identify these springs |
they are meant to be a 2 inch lift as well |
|
| Author: | Junior_91 [ Sun Apr 18, 2010 7:47 pm ] |
| Post subject: | Re: help identify these springs |
Any pics? |
|
| Author: | eldo [ Sun Apr 18, 2010 8:03 pm ] |
| Post subject: | Re: help identify these springs |
i can take some if you like but it really just says SUZ-01 etc |
|
| Author: | Junior_91 [ Sun Apr 18, 2010 8:24 pm ] |
| Post subject: | Re: help identify these springs |
My guess would be Efs mate. But normally they have their own sticker on them as well?? |
|
| Author: | MacDaddy [ Sun Apr 18, 2010 8:29 pm ] |
| Post subject: | Re: help identify these springs |
Junior_91 wrote: Any pics?
X 2 Need pics !
|
|
| Author: | SuziBlu [ Sun Apr 18, 2010 8:31 pm ] |
| Post subject: | Re: help identify these springs |
I punched in SUZ-01 sierra springs into google, and up in the engine came King Springs with the models. |
|
| Author: | eldo [ Sun Apr 18, 2010 8:45 pm ] |
| Post subject: | Re: help identify these springs |
SuziBlu wrote: I punched in SUZ-01 sierra springs into google, and up in the engine came King Springs with the models.
i did as well but then download the catalogue and the number is actually SUZ-011 for standards and no mention of the SUZ-02. i also did the efs thing and all i could find was SUZ-02E |
|
| Author: | BUZOOKA [ Sun Apr 18, 2010 8:57 pm ] |
| Post subject: | Re: help identify these springs |
my ome ones have something similar to that on them in a yellow paint |
|
| Author: | Joe [ Sun Apr 18, 2010 8:59 pm ] |
| Post subject: | Re: help identify these springs |
I got some two inch lifted spring from TJM a few years ago that had suz01 printed on em in white i cant remember what brand TJM sells though 
|
|
| Author: | alex [ Sun Apr 18, 2010 9:44 pm ] |
| Post subject: | Re: help identify these springs |
proberly EFS 
the EFS sticker is half under where the U bolts go but arfter a while they get riped off
|
|
| Author: | BlueSuzy [ Mon Apr 19, 2010 12:17 am ] |
| Post subject: | Re: help identify these springs |
King springs. |
|
| Author: | Bruce [ Mon Apr 19, 2010 12:19 am ] |
| Post subject: | Re: help identify these springs |
Just call them Buttercup
|
|
| Author: | BlueSuzy [ Mon Apr 19, 2010 12:24 am ] |
| Post subject: | Re: help identify these springs |
King springs are SUZ-001 to 011 Bottom of 1st page http://www.kingsprings.com/catalogue/ki ... alogue.pdf They also normally have a small square sticker. See if there is any sticky glue left |
|
| Author: | Moph [ Mon Apr 19, 2010 12:34 am ] |
| Post subject: | Re: help identify these springs |
Seeing as the spring experts are in this thread ... anyone know what the + and () symbols on OME 2" lifted springs are? I took it to mean + driver's side and () passenger but still have about 15mm Sierra lean on the driver's side... |
|
| Author: | joeblow [ Mon Apr 19, 2010 12:55 am ] |
| Post subject: | Re: help identify these springs |
Moph wrote: Seeing as the spring experts are in this thread ... anyone know what the + and () symbols on OME 2" lifted springs are? I took it to mean + driver's side and () passenger but still have about 15mm Sierra lean on the driver's side...
+ means its above manufacturing tolerance, i.e a beez penis higher. - means they are a little lower. if they don't have a - or a + they are spot on. |
|
| Author: | Moph [ Mon Apr 19, 2010 1:01 am ] |
| Post subject: | Re: help identify these springs |
Beaut - thanks Joe. |
|
| Author: | eldo [ Mon Apr 19, 2010 1:15 am ] |
| Post subject: | Re: help identify these springs |
BlueSuzy wrote: King springs are SUZ-001 to 011
Bottom of 1st page http://www.kingsprings.com/catalogue/ki ... alogue.pdf They also normally have a small square sticker. See if there is any sticky glue left i also looked at that and mine say SUZ-01 and SUZ-02 not 001 or 002. im gonna go take a picture, its true all posts need pics |
|
| Author: | eldo [ Mon Apr 19, 2010 1:31 am ] |
| Post subject: | Re: help identify these springs |
ok so im smokin crack and i should pay more attention, they say SUZI-01 and SUZI-02 which is these http://www.4x4.net.au/products/partView.php?Table=LSp so i guess now i will go check what they are |
|
| Author: | eldo [ Mon Apr 19, 2010 1:34 am ] |
| Post subject: | Re: help identify these springs |
 
|
|
| Author: | eldo [ Mon Apr 19, 2010 1:40 am ] |
| Post subject: | Re: help identify these springs |
so what i worked out so far is the SUZI-02 are direct supsensions or EFS springs for constant 120kg in 2 inch. i cant seem to find the SUZI-01 info though |
|
| Author: | BlueSuzy [ Mon Apr 19, 2010 2:08 am ] |
| Post subject: | Re: help identify these springs |
Not kings. Kings do not have military wrap or bolt rear retainers. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|