auszookers.com
https://auszookers.com/forum/

vitara diffs into sierra
https://auszookers.com/forum/viewtopic.php?f=5&t=11286		 Page 1 of 1
Author:  needmorelift [ Tue Apr 20, 2010 6:43 pm ]
Post subject:  vitara diffs into sierra
hey guys i got a mate whos got spare diff centres and hes going to lock them so we've been talking about dropping the diffs into my sierra to give me a better low range gearing. just wondering whats involved in swapping centres? wether i have to take all the bearings and axles out?

cheers guys
Author:  tanshi [ Tue Apr 20, 2010 6:51 pm ]
Post subject:  Re: vitara diffs into sierra
the vitara front diff is alloy, so weak as piss. the rear one wont fit in a sierra at all as it is a different size.

the only thing useful is the ring and pinion from the front diff.
Author:  needmorelift [ Tue Apr 20, 2010 7:19 pm ]
Post subject:  Re: vitara diffs into sierra
talking about actual centres yeah? not housings,,,
Author:  tanshi [ Tue Apr 20, 2010 7:25 pm ]
Post subject:  Re: vitara diffs into sierra
i believe the carrier is also alloy. Its not worth stuffing around when you can just use the sierra diff centre with the gears from the vit. the rear one is no good for anything sierra though
Author:  needmorelift [ Tue Apr 20, 2010 7:27 pm ]
Post subject:  Re: vitara diffs into sierra
oh okay it all sounds a little complicated for me to do haha was thinking it might be an easy install
Author:  rob_macca67 [ Wed Apr 21, 2010 1:00 pm ]
Post subject:  Re: vitara diffs into sierra
needmorelift wrote:
oh okay it all sounds a little complicated for me to do haha was thinking it might be an easy install


I believe that Ninjadaniel runs the Vitara Alloy 5.12 centres in his Sierra (Front & rear). Not sure if he has broken them or as to how much 4wdriving he does though.... Might pay to PM him
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/