| auszookers.com https://auszookers.com/forum/ |
|
| cino same bolt patten as a sierra??? https://auszookers.com/forum/viewtopic.php?f=5&t=11287 |
Page 1 of 1 |
| Author: | manup [ Tue Apr 20, 2010 6:47 pm ] |
| Post subject: | cino same bolt patten as a sierra??? |
hi im just lookin and workin out a cheap, smart motor for my blown sierra. is and will a cino g13b motor fit a 91 sierra without many problems??? |
|
| Author: | paulv [ Tue Apr 20, 2010 7:30 pm ] |
| Post subject: | Re: cino same bolt patten as a sierra??? |
Cino is just a different name for a Swift. There is an enormous amount of information within this forum in regards to installing Suzuki Swift g13b motors into Sierra's. Search is your friend.... Short answer is yes, the engine will bolt up to the gear box. You will probably have to do something about the distributor, and the heater hoses, etc as the rear of the block will now be up against your firewall, as opposed to the side of the engine bay in the front drive Swift. |
|
| Author: | BlueSuzy [ Tue Apr 20, 2010 9:21 pm ] |
| Post subject: | Re: cino same bolt patten as a sierra??? |
Bolt up. Run siera dizzy,sump and oil pickup, Intake manifold, eng mounts. Unsure if u have to run sierra head as of water outlets. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|