| auszookers.com https://auszookers.com/forum/ |
|
| help b4 motor swap. swift to sierra https://auszookers.com/forum/viewtopic.php?f=5&t=11517 |
Page 1 of 1 |
| Author: | manup [ Sun May 02, 2010 11:47 am ] |
| Post subject: | help b4 motor swap. swift to sierra |
ok, i got a 91 sierra with a worn out motor. i just got a complete 98 suzuki cino to do a motor swap. (both carby) ok ive been on this site doin a search for an hour to know everything i need to know to do the swap b4 i start i know so far swap dizzy, sump, oil pick up, water pump (so the fan can bolt up), do i need to swap the cam? and everything else i need to know ? any help would be great thanx |
|
| Author: | steak_knife [ Sun May 02, 2010 1:05 pm ] |
| Post subject: | Re: help b4 motor swap. swift to sierra |
You may need to swap bottem pully's to, I could be wrong on that tho. The swift water pump is not made to take the extra load of a fan, that's why you change em. |
|
| Author: | manup [ Mon May 03, 2010 11:27 am ] |
| Post subject: | Re: help b4 motor swap. swift to sierra |
ok cool.ill look that up. thanx anything else anyone? |
|
| Author: | eldo [ Mon May 03, 2010 11:40 am ] |
| Post subject: | Re: help b4 motor swap. swift to sierra |
i have nothing to add but there are a few of us from the gong so if i can help drop me a pm, cant guaruntee that i will be able to drop past though, busy with work etc... |
|
| Author: | Santos [ Mon May 03, 2010 12:02 pm ] |
| Post subject: | Re: help b4 motor swap. swift to sierra |
Swap the intake manifold& carb ... pretty sure the cino has the themostat on the wrong side If you want to use the ribbed pulleys on the cino get a vitara waterpump pulley (that way you are set up for power steering or Endless air) |
|
| Author: | jonno_racing [ Mon May 03, 2010 12:09 pm ] |
| Post subject: | Re: help b4 motor swap. swift to sierra |
u need to swap cam 2 |
|
| Author: | MART [ Mon May 03, 2010 12:44 pm ] |
| Post subject: | Re: help b4 motor swap. swift to sierra |
x2 on cam , Cheers Paul. |
|
| Author: | losfer [ Wed May 05, 2010 9:16 am ] |
| Post subject: | Re: help b4 motor swap. swift to sierra |
As well as the above , it is easier to use the crank and cam sprockets and timing belt , pullies etc from the old motor , the bottom sprocket on the 98 cino has 5 bolts and must use the 3pk pulleys , the sierra uses a 4 bolt pattern for the 11a0 style belt , if you want the multirib setup , you have to find a vitara water pump pulley that has the 4pk belt setup to use in conjunction with the 3pk setup the cino uses , along with a sierra water pump . alternatively , you can use the entire 3pk multirib pulley setup , including the cino alternator , and cino water pump , but you will need a thermo fan. hope this makes sense |
|
| Author: | steak_knife [ Wed May 05, 2010 9:29 am ] |
| Post subject: | Re: help b4 motor swap. swift to sierra |
steknig wrote: You may need to swap bottem pully's to, I could be wrong on that tho.
The swift water pump is not made to take the extra load of a fan, that's why you change em. I have been proven wrong again. 
The internal's of the pump's are the same but the swift has a bugger flange, or hub. so the pump it's self would easyly take the strain of a fan. 
I like learning. 
|
|
| Author: | manup [ Thu May 06, 2010 11:58 am ] |
| Post subject: | Re: help b4 motor swap. swift to sierra |
great help guys. thanx a heap |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|