[zookster666]

Does anyone know where to get the banjo bolt with copper washers to suit the vitara p/s box high pressure line. Brisbane area would be good

Also does anyone know what sort of rubber hose I can use for the low pressure hose from the box to the resovoir does it have to be a steel line like the stock one?

Zookster

[mrw82]

go to enzed. they will have everything you need.

the low pressure line can be just low pressure hose (SAE R6 or R7). but if it is a long run it would be better (and cheaper) to run a length of steel tube (called bundy tube)

[zookster666]

Thanks for the fast reply bud will try them tomorrow