| auszookers.com https://auszookers.com/forum/ |
|
| dented efi fuel tank swb efi vitara https://auszookers.com/forum/viewtopic.php?f=5&t=11677 |
Page 1 of 1 |
| Author: | mikkiguns [ Sat May 08, 2010 11:43 pm ] |
| Post subject: | dented efi fuel tank swb efi vitara |
hey guys my fuel tank has a massive dent that spans the entire bottom of the fuel tank from crease to crease its the injected model with the fuel pump in it. whats the best way to go to pop the dent and hopefully get it back to original shape? thanks in advance for any ideas |
|
| Author: | ainzy [ Sat May 08, 2010 11:51 pm ] |
| Post subject: | Re: dented efi fuel tank swb efi vitara |
drain out the fuel clean the tank super well like your life depends on it ( it does ) heat the dinted area with oxy set and then using a rubber bung of some sort with a air nozzel fitted jam the bung into the fill hole and blow the dint out.... |
|
| Author: | SuziBlu [ Sun May 09, 2010 12:55 am ] |
| Post subject: | Re: dented efi fuel tank swb efi vitara |
ainzy wrote: drain out the fuel clean the tank super well like your life depends on it ( it does ) heat the dinted area with oxy set and then using a rubber bung of some sort with a air nozzel fitted jam the bung into the fill hole and blow the dint out....
Thats a life gone if you do that. |
|
| Author: | mikkiguns [ Sun May 09, 2010 1:30 am ] |
| Post subject: | Re: dented efi fuel tank swb efi vitara |
thanks boys but anyway without the flameage? |
|
| Author: | SuziBlu [ Sun May 09, 2010 1:36 am ] |
| Post subject: | Re: dented efi fuel tank swb efi vitara |
That wasn't flame throwing, just a statement of fact. Doing anything with open flame in regard fuel tanks is a specialist job, or your dead. I would find a good second hand one, or take it to someone who can vent the tank with inert gas before attempting to do it yourself. |
|
| Author: | mikkiguns [ Sun May 09, 2010 1:48 am ] |
| Post subject: | Re: dented efi fuel tank swb efi vitara |
hence why i said without the flamage |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|