Find import 6 stud hubs, discs and drums.
Uber Rare. And you DON'T want that with consumables. Because worn disc's? PITA to find another!
Whats wrong with the 5 stud?
Next option is diff conversion
| auszookers.com https://auszookers.com/forum/ |
|
| Best way to conver to 6 stud hubs? https://auszookers.com/forum/viewtopic.php?f=5&t=11802 |
Page 1 of 1 |
| Author: | Jord [ Wed May 12, 2010 1:01 pm ] |
| Post subject: | Best way to conver to 6 stud hubs? |
Hi all, just wanting to know what the best/easiest way to convert the suzuki's 5 stud pattern to a toyota 6 stud, any advice would be great, Jordan |
|
| Author: | BlueSuzy [ Wed May 12, 2010 1:03 pm ] |
| Post subject: | Re: Best way to conver to 6 stud hubs? |
Find import 6 stud hubs, discs and drums. Uber Rare. And you DON'T want that with consumables. Because worn disc's? PITA to find another! Whats wrong with the 5 stud? Next option is diff conversion
|
|
| Author: | BUZOOKA [ Thu May 13, 2010 2:23 am ] |
| Post subject: | Re: Best way to conver to 6 stud hubs? |
just chuck some lux diffs under would most likely work out more easier then try to change the stud pattern on origanal diffs |
|
| Author: | ninjadaniel [ Thu May 13, 2010 2:43 am ] |
| Post subject: | Re: Best way to conver to 6 stud hubs? |
is it possible to get wheel spacers that convert from 5 stud to 6 stud? |
|
| Author: | BlueSuzy [ Thu May 13, 2010 3:01 am ] |
| Post subject: | Re: Best way to conver to 6 stud hubs? |
ninjadaniel wrote: is it possible to get wheel spacers that convert from 5 stud to 6 stud?
Yes. But costly. I'd rather buy a rim than a spacer. Rims are generally cheaper $. Also depends on how legal you want the car. Also greater wheel bearing wear. |
|
| Author: | Gwagensteve [ Thu May 13, 2010 6:46 am ] |
| Post subject: | Re: Best way to conver to 6 stud hubs? |
X2 it's false economy. If you find the almost mythical 6 stud hubs, that's cool. You now have impossible to replace drums and rotors. 5 stud rims aren't hard to find or expensive. if you want to do it to swap tyres between another car you own and your suzuki, think carefully about how suitable the 6 stud car's wheels and tyres are. I bet the rims are unnecessarily heavy and the tyres have an excessive load rating. It's not worth the hassle in my book. Steve. |
|
| Author: | Jord [ Thu May 13, 2010 8:24 am ] |
| Post subject: | Re: Best way to conver to 6 stud hubs? |
think ill just sell of my pairs of 6 stud rims and get myself some 5 studs, at the end of the day its going to turn out to be cheaper and easier. cheers Jordan |
|
| Author: | rpmwrx [ Thu May 13, 2010 8:46 am ] |
| Post subject: | Re: Best way to conver to 6 stud hubs? |
U should be able to pickup some 2nd hand f100 rims for around $35ea which do the job nicely! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|