auszookers.com
https://auszookers.com/forum/

Transfer Gears
https://auszookers.com/forum/viewtopic.php?f=5&t=1187		 Page 1 of 1
Author:  sosilboy [ Wed Jul 18, 2007 4:36 pm ]
Post subject:  Transfer Gears
How hard are they to install?
Author:  royce [ Wed Jul 18, 2007 4:41 pm ]
Post subject:  Re: Transfer Gears
very easy for a gearbox shop, normal home mechanic could do it taking there time, if your not into measuring clearences and precise work pay somebody
Author:  MART [ Wed Jul 18, 2007 6:40 pm ]
Post subject:  Re: Transfer Gears
What series gears as stage 4 need the case ground , takes an hour to pull case out tops , 3 hours to strip change gears and reassemble , 1 1/2 to reinstall , so 6 hours , leave shifter hanging in boot and just undo from underneath , got some pics in my buildup , cheers Paul.
Author:  steve [ Wed Jul 18, 2007 6:56 pm ]
Post subject:  Re: Transfer Gears
i thought you wanted to go faster, not slower? :lol:
Author:  sosilboy [ Wed Jul 18, 2007 7:04 pm ]
Post subject:  Re: Transfer Gears
i dont know what i want, lol, i'd like a lower 4L but i'd also like 5 gears for the freeway:)
Author:  steve [ Wed Jul 18, 2007 7:25 pm ]
Post subject:  Re: Transfer Gears
why did you put a 1.3L case in? Did you get the gear lever bush in on your old 1L case?
Author:  sosilboy [ Thu Jul 19, 2007 2:07 am ]
Post subject:  Re: Transfer Gears
no i already bought a replacement transfer case then had the same problem with the second one (the 1.3lt) so i figured id ask round to see if it were common.....
Author:  MART [ Thu Jul 19, 2007 2:25 am ]
Post subject:  Re: Transfer Gears
What problem ? Cheers Paul.
Author:  sosilboy [ Thu Jul 19, 2007 4:30 pm ]
Post subject:  Re: Transfer Gears
the old transfer case getting stuck in 4L/N
Author:  royce [ Thu Jul 19, 2007 4:34 pm ]
Post subject:  Re: Transfer Gears
$2 bush and 5 mins, probem solved
Author:  sosilboy [ Thu Jul 19, 2007 9:24 pm ]
Post subject:  Re: Transfer Gears
yeah ive done it aready, steve was just wondering
Author:  MART [ Thu Jul 19, 2007 10:16 pm ]
Post subject:  Re: Transfer Gears
Are you using VMX80 gear oil , that is the recommended one , done heaps of reduction gears and had no problems , Cheers Paul.
Author:  steve [ Thu Jul 19, 2007 10:27 pm ]
Post subject:  Re: Transfer Gears
this thread is confusing :lol:

I think for the amount of money you would spend on a motor conversion/upgrade and crawler gears, you could just sell your current car and buy a different one that goes better. :)
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/