| auszookers.com https://auszookers.com/forum/ |
|
| g13b twim cam head on g16b block https://auszookers.com/forum/viewtopic.php?f=5&t=11900 |
Page 1 of 1 |
| Author: | simonprice [ Sun May 16, 2010 9:43 am ] |
| Post subject: | g13b twim cam head on g16b block |
i am just wondering if ne one knows about this engine set up and wat it gives u just wondering cuz i hav a g13b twin cam with a aftermarket computer and 2 1/4 inch exhaust pm me with info plz |
|
| Author: | joeblow [ Sun May 16, 2010 11:54 am ] |
| Post subject: | Re: g13b twim cam head on g16b block |
simonprice wrote: cuz i saw it in a 4wd monthly mag
it gives you NOTHING over a 16 valve vitara head. |
|
| Author: | simonprice [ Sun May 16, 2010 12:09 pm ] |
| Post subject: | Re: g13b twim cam head on g16b block |
can u get a g16b in twin cam |
|
| Author: | atari4x4 [ Sun May 16, 2010 12:18 pm ] |
| Post subject: | Re: g13b twim cam head on g16b block |
not that i know of, what joeblow is trying to say is the 16 valve vitara head flows better the the GTI twin cam head. |
|
| Author: | simonprice [ Sun May 16, 2010 12:26 pm ] |
| Post subject: | Re: g13b twim cam head on g16b block |
so is it a big difference wen u do it and i no his reply didnt make sense to me |
|
| Author: | zookster666 [ Sun May 16, 2010 10:49 pm ] |
| Post subject: | Re: g13b twim cam head on g16b block |
What they are saying is it can be done but to get the full benifit of the 1.6 is to use the 1.6 16 valve head |
|
| Author: | mnemonix [ Sun May 16, 2010 11:33 pm ] |
| Post subject: | Re: g13b twim cam head on g16b block |
I've had this engine for a few years. With all the bolt on fruit and aftermarket ecu to manage it. Has SFA benefit over a stock G16b. Despite all the work and expense. |
|
| Author: | BlueSuzy [ Sun May 16, 2010 11:36 pm ] |
| Post subject: | Re: g13b twim cam head on g16b block |
Easy suzuki conversions - G13bTwincam G13bb.Singlecam G16b.Singlecam Keep stock = win. No hybrids. Hybrids are ok if they are for a honda. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|