| auszookers.com https://auszookers.com/forum/ |
|
| Trailgear 3" lift springs https://auszookers.com/forum/viewtopic.php?f=5&t=11948 |
Page 1 of 1 |
| Author: | zukmeista [ Tue May 18, 2010 12:00 am ] |
| Post subject: | Trailgear 3" lift springs |
Has anybody got them? Are they any good in terms of ride comfort and retaining their height, i.e do they sag? |
|
| Author: | BUZOOKA [ Tue May 18, 2010 12:10 am ] |
| Post subject: | Re: Trailgear 3" lift springs |
i think junior has it in his and it has sagged about and inch jump on his build or try the search button and see wat comes up |
|
| Author: | BlueSuzy [ Tue May 18, 2010 1:03 am ] |
| Post subject: | Re: Trailgear 3" lift springs |
With 3" springs I have heard they are stiffer than Mr Buzooka at a Gaybar. Most 2" springs are hard enough and need to be softened with leafs removed. Not many people run 3" springs, here, outers or anywhere. You may have to try www.Pirate4x4.com as trailgear is american branding and more commonly bought. As postage would be a killer for them to be sent here to Aus or Baa land (nz) |
|
| Author: | 5ierra [ Tue May 18, 2010 1:29 am ] |
| Post subject: | Re: Trailgear 3" lift springs |
Juniour is running them and they did sag, so he started taking leaves out and fucking with them etc etc. I remeber speaking to him about them when i was getting an OME lift priced. |
|
| Author: | Ridge [ Tue May 18, 2010 3:08 am ] |
| Post subject: | Re: Trailgear 3" lift springs |
a friend of mine runs them, and they are stiff even with only 3 leaf packs. im not sure how old they are but they look fairly new, they were on the car when he got it. |
|
| Author: | Junior_91 [ Tue May 18, 2010 9:55 am ] |
| Post subject: | Re: Trailgear 3" lift springs |
Yep i run them and wouldn't recomend them as a 3" lift how ever if you run them not wanting the 3" lift just flex then they are good for that then when i played with the packs i can drop a 33 well bellow sill height |
|
| Author: | zukmeista [ Tue May 18, 2010 7:06 pm ] |
| Post subject: | Re: Trailgear 3" lift springs |
Junior_91 wrote: Yep i run them and wouldn't recomend them as a 3" lift how ever if you run them not wanting the 3" lift just flex then they are good for that then when i played with the packs i can drop a 33 well bellow sill height What lift did they give after you modified them?
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|