Fitted some Monroe GT shocks to the Zook with the RUF. Took it offroad for the first time on Sunday and banged my rear shocks up bad - they have plenty of clearance at rest but have been hitting on the brake line mounts under compression as the shackle flattens out and the diff moves back.
Most of the damage is to the dust cap with only a very slight (maybe 2mm at most) dent in the reserve tube of the shock, which I can't imagine has affected the pressure tube at all. Can I just run a cutting wheel around the top of the dust protector and throw it? If so then I'll do that, space them out a couple of mil at the bottom mount and be done with it.
Shocks are these ones. The bit I've dented up bad is the bit with the "Monroe GT Gas" sticker on it - hoping I can just cut it off up near the top of the shock.
