| auszookers.com https://auszookers.com/forum/ |
|
| gearbox stuck in reverse https://auszookers.com/forum/viewtopic.php?f=5&t=12104 |
Page 1 of 2 |
| Author: | suzukilwb [ Sun May 23, 2010 8:30 am ] |
| Post subject: | gearbox stuck in reverse |
my gearbox stuck in reverse its a sierra 5 speed i put a clutch in a few mouths ago and put new oil in at the same time and when i come to test it the gears where hard to get like had to swing off the shifter to get them and it wasn't that hard before and then we got it to sorta work and hope it would free up but it didn't and got worse and now its stuck reverse any ideas on how to fix it? i thought the oil might have been to think but when i did a search looks like i useing the right stuff |
|
| Author: | BUZOOKA [ Sun May 23, 2010 8:43 am ] |
| Post subject: | Re: gearbox stuck in reverse |
i think there was already a thread on this a little while ur shifter bush might be screwed mate |
|
| Author: | steak_knife [ Sun May 23, 2010 9:14 am ] |
| Post subject: | Re: gearbox stuck in reverse |
suzukilwb wrote: my gearbox stuck in reverse its a sierra 5 speed i put a clutch in a few mouths ago and put new oil in at the same time and when i come to test it the gears where hard to get like had to swing off the shifter to get them and it wasn't that hard before and then we got it to sorta work and hope it would free up but it didn't and got worse and now its stuck reverse any ideas on how to fix it? i thought the oil might have been to think but when i did a search looks like i useing the right stuff
can you select rev with the eng off??? if yes adjust your clutch.. |
|
| Author: | steak_knife [ Sun May 23, 2010 9:18 am ] |
| Post subject: | Re: gearbox stuck in reverse |
Or you put the clutch plate in back to front.. |
|
| Author: | suzukilwb [ Sun May 23, 2010 9:21 am ] |
| Post subject: | Re: gearbox stuck in reverse |
steknig wrote: suzukilwb wrote: my gearbox stuck in reverse its a sierra 5 speed i put a clutch in a few mouths ago and put new oil in at the same time and when i come to test it the gears where hard to get like had to swing off the shifter to get them and it wasn't that hard before and then we got it to sorta work and hope it would free up but it didn't and got worse and now its stuck reverse any ideas on how to fix it? i thought the oil might have been to think but when i did a search looks like i useing the right stuff can you select rev with the eng off??? if yes adjust your clutch.. nah i try with the clutch right in and moving the leaver then let the clutch out and move it no luck so don't think its that |
|
| Author: | suzukilwb [ Sun May 23, 2010 9:26 am ] |
| Post subject: | Re: gearbox stuck in reverse |
steknig wrote: Or you put the clutch plate in back to front..
nah its not that i don't think the clutch grabs half way up so think that part of it is fine |
|
| Author: | steak_knife [ Sun May 23, 2010 9:31 am ] |
| Post subject: | Re: gearbox stuck in reverse |
suzukilwb wrote: steknig wrote: can you select rev with the eng off??? if yes adjust your clutch.. nah i try with the clutch right in and moving the leaver then let the clutch out and move it no luck so don't think its that Did you try that?? was rev the first gear you tried?? |
|
| Author: | steak_knife [ Sun May 23, 2010 9:33 am ] |
| Post subject: | Re: gearbox stuck in reverse |
H/brake off, all wheel's on the ground ing OFF, rock the car & try to select neutral. |
|
| Author: | royce [ Sun May 23, 2010 9:34 am ] |
| Post subject: | Re: gearbox stuck in reverse |
stuck as in cant take it out of reverse at all? does the shifter flop around a lot? |
|
| Author: | suzukilwb [ Sun May 23, 2010 9:36 am ] |
| Post subject: | Re: gearbox stuck in reverse |
steknig wrote: suzukilwb wrote: steknig wrote: can you select rev with the eng off??? if yes adjust your clutch.. nah i try with the clutch right in and moving the leaver then let the clutch out and move it no luck so don't think its that Did you try that?? was rev the first gear you tried?? i did it motor on and off but will have that other one a try in the morning and see how i go and no it was the last didn't wont to go in any other gear |
|
| Author: | suzukilwb [ Sun May 23, 2010 9:41 am ] |
| Post subject: | Re: gearbox stuck in reverse |
royce wrote: stuck as in cant take it out of reverse at all?
does the shifter flop around a lot? yeah wont move and yeah it dose u would think it was sorta in natural but wont go anyway it sounds like it select a gear but then its still stuck but it was stuck in natural first |
|
| Author: | steak_knife [ Sun May 23, 2010 9:53 am ] |
| Post subject: | Re: gearbox stuck in reverse |
Snapped shifter bolt. |
|
| Author: | suzukilwb [ Sun May 23, 2010 10:31 am ] |
| Post subject: | Re: gearbox stuck in reverse |
steknig wrote: Snapped shifter bolt.
umm where would i look for that some pics
|
|
| Author: | steak_knife [ Sun May 23, 2010 10:41 am ] |
| Post subject: | Re: gearbox stuck in reverse |
suzukilwb wrote: steknig wrote: Snapped shifter bolt. umm where would i look for that some pics ![]() See the lil bolt sitting all crocked down tha shifter hole?? that's the one. http://www.suzistore.com.au/shopexd.asp?id=8 http://www.suzistore.com.au/shopexd.asp?id=7 2 different type's, yours look's like the top one.. |
|
| Author: | suzukilwb [ Sun May 23, 2010 10:51 am ] |
| Post subject: | Re: gearbox stuck in reverse |
cheers for that steknig might see if the one out of my 4speed fits probably wont |
|
| Author: | steak_knife [ Sun May 23, 2010 10:54 am ] |
| Post subject: | Re: gearbox stuck in reverse |
suzukilwb wrote: cheers for that steknig might see if the one out of my 4speed fits probably wont
It's worth a go, tell us if it does.. |
|
| Author: | suzukilwb [ Mon May 24, 2010 8:59 am ] |
| Post subject: | Re: gearbox stuck in reverse |
well i got the bolt out the 4speed it was broken two so i made a new bolt up today just ground of some of the thread just to see if that was the problem then get a proper one later but its still stuck wont come out i got my mate to rock the car for me wile trying to get it to move and nothing any other suggestion? |
|
| Author: | steak_knife [ Mon May 24, 2010 9:15 am ] |
| Post subject: | Re: gearbox stuck in reverse |
steknig wrote: ![]() [/quote] See down the hole, in the pic you have the same square looking thingy?? The one to the top, see how the shaft to the left seems to be behind it? That square thing should be on a spring, use a blade screw driver to push it away from the selector, then try to leaver that selector toward the right. If that don't work, you may have damaged a selector deeper in the box 7 will need stripping. |
|
| Author: | MART [ Mon May 24, 2010 9:17 am ] |
| Post subject: | Re: gearbox stuck in reverse |
Use a screwdriver to move the reverse gate back to the correct position while the shifter is out , Cheers Paul. |
|
| Author: | steak_knife [ Mon May 24, 2010 9:19 am ] |
| Post subject: | Re: gearbox stuck in reverse |
There. |
|
| Author: | suzukilwb [ Mon May 24, 2010 9:40 am ] |
| Post subject: | Re: gearbox stuck in reverse |
cheers i well give it a go tomorrow |
|
| Author: | royce [ Mon May 24, 2010 11:16 am ] |
| Post subject: | Re: gearbox stuck in reverse |
yeah you arent putting the stick back in the right spot, you need to either get it back in neutral or stick the shifter back in reverse |
|
| Author: | suzukilwb [ Mon May 24, 2010 11:25 am ] |
| Post subject: | Re: gearbox stuck in reverse |
royce wrote: yeah you arent putting the stick back in the right spot, you need to either get it back in neutral or stick the shifter back in reverse
yeah thats what its like but when i put it in it only go right down in one spot the wrong one by the sounds of it |
|
| Author: | royce [ Mon May 24, 2010 11:48 am ] |
| Post subject: | Re: gearbox stuck in reverse |
ey stekky thats where 2nd would be, reverse is at the bottom of the pic |
|
| Author: | steak_knife [ Mon May 24, 2010 11:51 am ] |
| Post subject: | Re: gearbox stuck in reverse |
royce wrote: ey stekky thats where 2nd would be, reverse is at the bottom of the pic
Just got that my self I was confused cause i couldn't see any tar. |
|
| Author: | royce [ Mon May 24, 2010 11:53 am ] |
| Post subject: | Re: gearbox stuck in reverse |
on the left is what teh slots in your box will look like, on the right is how they need to be before you put the stick in,m use a big screwdriver to pop it back, then it will be in neutral |
|
| Author: | suzukilwb [ Sun May 30, 2010 11:17 pm ] |
| Post subject: | Re: gearbox stuck in reverse |
well new problem i got it out of reverse now yay but its makeing griding noise now but i got it to stop when rocking it now should i try and get first gear now? just dont wont to make it worse |
|
| Author: | steak_knife [ Mon May 31, 2010 6:39 am ] |
| Post subject: | Re: gearbox stuck in reverse |
suzukilwb wrote: well new problem i got it out of reverse now yay but its makeing griding noise now but i got it to stop when rocking it now should i try and get first gear now? just dont wont to make it worse
When?? is it full of oil? |
|
| Author: | suzukilwb [ Mon May 31, 2010 9:08 am ] |
| Post subject: | Re: gearbox stuck in reverse |
nah its not and its cos it wasn't right out reverse now its hard to change gears |
|
| Author: | steak_knife [ Mon May 31, 2010 9:15 am ] |
| Post subject: | Re: gearbox stuck in reverse |
Does it have a good clutch peddle? Is it adjusted properly? g/box's like oil.. |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|