finlay113 wrote:
ok thanks mate. how much better does the 1.6 go than the 1.3?
Surely you don't need the answer to that question???
| auszookers.com https://auszookers.com/forum/ |
|
| g16b out of baleno into sierra https://auszookers.com/forum/viewtopic.php?f=5&t=12114 |
Page 1 of 1 |
| Author: | finlay113 [ Sun May 23, 2010 11:19 am ] |
| Post subject: | g16b out of baleno into sierra |
just lookin for some input from u guys on puttin a g16b out of a baleno into my sierra, its a coil pack engine, is it a simple conversion the same as puttin one out of a vitara?? |
|
| Author: | Fatzook [ Sun May 23, 2010 11:33 am ] |
| Post subject: | Re: g16b out of baleno into sierra |
finlay113 wrote: just lookin for some input from u guys on puttin a g16b out of a baleno into my sierra, its a coil pack engine, is it a simple conversion the same as puttin one out of a vitara??
very similar. A little more wiring, and a few small plumbing changes, but its a pretty simple swap. Not having a dizzy is awesome! |
|
| Author: | finlay113 [ Sun May 23, 2010 11:36 am ] |
| Post subject: | Re: g16b out of baleno into sierra |
i thought it should be pretty much the same. do u know of anyone thats done this before? |
|
| Author: | Fatzook [ Sun May 23, 2010 11:58 am ] |
| Post subject: | Re: g16b out of baleno into sierra |
finlay113 wrote: i thought it should be pretty much the same. do u know of anyone thats done this before?
Me. There are a few write ups around the traps. Hit the search tab at the top of the page. Also try the bible at the top of the suzuki page on Outerlimits4x4.com |
|
| Author: | finlay113 [ Sun May 23, 2010 12:00 pm ] |
| Post subject: | Re: g16b out of baleno into sierra |
ok thanks mate. how much better does the 1.6 go than the 1.3? |
|
| Author: | Fatzook [ Sun May 23, 2010 12:02 pm ] |
| Post subject: | Re: g16b out of baleno into sierra |
finlay113 wrote: ok thanks mate. how much better does the 1.6 go than the 1.3?
Surely you don't need the answer to that question???
|
|
| Author: | finlay113 [ Sun May 23, 2010 12:04 pm ] |
| Post subject: | Re: g16b out of baleno into sierra |
haha true. i just want it in already lol.cant wait to do it |
|
| Author: | BlueSuzy [ Sun May 23, 2010 12:08 pm ] |
| Post subject: | Re: g16b out of baleno into sierra |
http://www.outerlimits4x4.com/phpBB2/ft ... ght=baleno Mine and PJ zooks build up/swap at same time, different states! |
|
| Author: | Zachius [ Sun May 23, 2010 12:11 pm ] |
| Post subject: | Re: g16b out of baleno into sierra |
Lots of info by searching... I am slowly (yes very slowly, have had the motor for 6 months now) also doing this conversion. Here is my conversion thread which has some useful info: http://auszookers.com/index.php?name=Fo ... pic&t=8033 |
|
| Author: | MacDaddy [ Sun May 23, 2010 2:00 pm ] |
| Post subject: | Re: g16b out of baleno into sierra |
finlay113 wrote: i thought it should be pretty much the same. do u know of anyone thats done this before?
I am pretty sure that, MrRocky, has a baleno engine in his tray back Sierra, send him a PM !  
http://www.auszookers.com/index.php?nam ... ofile=1430 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|