| auszookers.com https://auszookers.com/forum/ |
|
| Jimny springs into sierra https://auszookers.com/forum/viewtopic.php?f=5&t=12159 |
Page 1 of 1 |
| Author: | cbzook [ Mon May 24, 2010 1:57 pm ] |
| Post subject: | Jimny springs into sierra |
can i fit jimny springs into a sierra coily, if i was to modify front shocks? |
|
| Author: | BlueSuzy [ Mon May 24, 2010 2:26 pm ] |
| Post subject: | Re: Jimny springs into sierra |
Most probably, Got a tape measure? I have Jimny springs out. I can measure them tomorrow morning for you when i get up. |
|
| Author: | Rusho [ Mon May 24, 2010 7:05 pm ] |
| Post subject: | Re: Jimny springs into sierra |
cbzook wrote: can i fit jimny springs into a sierra coily, if i was to modify front shocks?
Front struts.....if you are thinking mega lift springs keep in mind it is really difficult to find struts that are longer than 50mm from standard. Your only options would be custom struts which would be really costly, or put the jimny type suspension mounts(shock and spring)which would also be a costly event if you had to get someone to do the work. Search for 'trogdor 2' saam's old rig. He did this type of setup. Had about 5 inches of lift from standard. Hope that helps I think the jimny springs will fit also |
|
| Author: | bigrig91 [ Tue May 25, 2010 12:20 am ] |
| Post subject: | Re: Jimny springs into sierra |
Zookimonsta has 80mm lifted Jimmy shocks and I think springs in the rear? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|