| auszookers.com https://auszookers.com/forum/ |
|
| G16B (dizzy-baleno spec) running lean https://auszookers.com/forum/viewtopic.php?f=5&t=12225 |
Page 1 of 1 |
| Author: | Mullett [ Thu May 27, 2010 5:35 am ] |
| Post subject: | G16B (dizzy-baleno spec) running lean |
So I've got the Baleno motor in my vitara, finally fully functional, and workign through the bugs. The biggest one was the dizzy, in the end I'm running the factory baleno dizzy, machined and adapted to use the shaft and gear from a Vitara dizzy, and the vitara right angle drive/cam. It's running lean, and for the life of me I can't work out why. The fuel pump is a GOSS, more than capable of the flow and pressure, I've replaced the FPR, checked the position and function of the TPS...etc. Any ideas? Thanks... -RM |
|
| Author: | steak_knife [ Thu May 27, 2010 8:35 am ] |
| Post subject: | Re: G16B (dizzy-baleno spec) running lean |
What fuel pressure dose it have & how do you know it's running lean? |
|
| Author: | JrZook [ Thu May 27, 2010 9:44 am ] |
| Post subject: | Re: G16B (dizzy-baleno spec) running lean |
Vac leak? + x2 to steakmans Q |
|
| Author: | LAY80N [ Thu May 27, 2010 10:24 pm ] |
| Post subject: | Re: G16B (dizzy-baleno spec) running lean |
What acutal mixture are you getting? Layto.... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|