| auszookers.com https://auszookers.com/forum/ |
|
| LJ Transfer Shifter https://auszookers.com/forum/viewtopic.php?f=5&t=12244 |
Page 1 of 1 |
| Author: | Highway-Star [ Thu May 27, 2010 11:55 pm ] |
| Post subject: | LJ Transfer Shifter |
OK at risk of sounding like a complete noob here, do LJ's have a shifter bush/seat/sheet? (heard so many names for them...) Thing is, non of the LJ transfers I've pulled apart appear to have one, they all shift fine, and the Suzuki parts catalogue doesn't list one 
Oh and if they are supposed to have one, is it the same as an SJ part? Cheers |
|
| Author: | steak_knife [ Fri May 28, 2010 4:53 am ] |
| Post subject: | Re: LJ Transfer Shifter |
I have 2 trasfr's here, 1 w/t 1 n/t, neither have a shifter bush & both select & arn't sloppy.
I have been thinking the same thing, different model's, same thing.. 
|
|
| Author: | Highway-Star [ Fri May 28, 2010 5:30 am ] |
| Post subject: | Re: LJ Transfer Shifter |
From what I have gathered the SJ part no. is 29541-80051 My Sierra never used to have one, and it was OK. When I put the transfer gears in it, I put one in, and it made it shift alot firmer. |
|
| Author: | steak_knife [ Fri May 28, 2010 5:54 am ] |
| Post subject: | Re: LJ Transfer Shifter |
http://www.suzistore.com.au/shopexd.asp?id=625 One of them, but mine has nothing in it, just a spring & the top retainer. NO SLOP!
I may get one just for the hell of it & see how much difference it make's.. |
|
| Author: | Highway-Star [ Fri May 28, 2010 6:05 am ] |
| Post subject: | Re: LJ Transfer Shifter |
Thats the thing I'm talking about  .
But I'm not sure if there is one for an LJ case? |
|
| Author: | steak_knife [ Fri May 28, 2010 6:17 am ] |
| Post subject: | Re: LJ Transfer Shifter |
Highway-Star wrote: Thats the thing I'm talking about
.But I'm not sure if there is one for an LJ case? Thay don't list one. |
|
| Author: | Bruce [ Fri May 28, 2010 6:22 am ] |
| Post subject: | Re: LJ Transfer Shifter |
steknig wrote: http://www.suzistore.com.au/shopexd.asp?id=625
One of them, but mine has nothing in it, just a spring & the top retainer. NO SLOP! I may get one just for the hell of it & see how much difference it make's.. Fuck me. $22.00. I know they need to make $$ but shittttttttt. I've been selling them for $5.00 
Might have to rethink my pricing 
|
|
| Author: | Highway-Star [ Fri May 28, 2010 6:26 am ] |
| Post subject: | Re: LJ Transfer Shifter |
steknig wrote: Highway-Star wrote: Thats the thing I'm talking about .But I'm not sure if there is one for an LJ case? Thay don't list one. No they don't. Nobody seems to. Maybe thats my answer
Just it look like one should fit in there... If I had a Sierra transfer laying around I'd pull it out and see if if works in the LJ case... |
|
| Author: | steak_knife [ Fri May 28, 2010 6:33 am ] |
| Post subject: | Re: LJ Transfer Shifter |
Highway-Star wrote: steknig wrote: Highway-Star wrote: Thats the thing I'm talking about .But I'm not sure if there is one for an LJ case? Thay don't list one. No they don't. Nobody seems to. Maybe thats my answer Just it look like one should fit in there... If I had a Sierra transfer laying around I'd pull it out and see if if works in the LJ case... I have 3, just remembered a delivery i had last night, will go pull the stick out & see what's there.. the other 2 have nothing, the w/t one was trying to run on mud tho!
|
|
| Author: | steak_knife [ Fri May 28, 2010 6:39 am ] |
| Post subject: | Re: LJ Transfer Shifter |
I must of been on crack*, thay all have bush, just hard to see the w/t one from the mud, if you over this way on the week end, drop in, you can have one of these.  Pm me if you want one..
*more than normal |
|
| Author: | Highway-Star [ Fri May 28, 2010 6:46 am ] |
| Post subject: | Re: LJ Transfer Shifter |
steknig wrote: I must of been on crack*, thay all have bush, just hard to see the w/t one from the mud, if you over this way on the week end, drop in, you can have one of these.
Pm me if you want one..*more than normal haha 
PM sent Thanks 
|
|
| Author: | steak_knife [ Fri May 28, 2010 6:55 am ] |
| Post subject: | Re: LJ Transfer Shifter |
Bruce wrote: steknig wrote: http://www.suzistore.com.au/shopexd.asp?id=625 One of them, but mine has nothing in it, just a spring & the top retainer. NO SLOP! I may get one just for the hell of it & see how much difference it make's.. Fuck me. $22.00. I know they need to make $$ but shittttttttt. I've been selling them for $5.00 Might have to rethink my pricing I don't think you should, you should do up a part's list of the bit's you do make, most of the time I forget you make bit's & just get new gen one's.. |
|
| Author: | 303zuke [ Fri May 28, 2010 2:01 pm ] |
| Post subject: | Re: LJ Transfer Shifter |
Highway-Star wrote: OK at risk of sounding like a complete noob here, do LJ's have a shifter bush/seat/sheet?
Cheers No, the LJ transfer cases never had a replaceable bush under the transfer lever. The seat was machined direct into the aluminium of the front case, and the steel locating pins are cast into the sides and cannot be replaced. Although splash lubricated from the gear oil, the steel lever would eventually wear into the softer alloy. On a transfer case that has seen a bit of use, this becomes a weak point and either requires major surgery, or replacement of the front case. Many moons ago (early 80's), Super Suzy in Qld used to do exchange front housings with the alloy seat milled out and a spherical seat bronze bush put in place, and the cast pins drilled out and Sierra threaded pins put in. I have no idea who would do the same sort of work these days, it might have to be a one off job with an engineering shop. 
|
|
| Author: | Highway-Star [ Fri May 28, 2010 11:16 pm ] |
| Post subject: | Re: LJ Transfer Shifter |
303zuke wrote: Highway-Star wrote: OK at risk of sounding like a complete noob here, do LJ's have a shifter bush/seat/sheet? Cheers No, the LJ transfer cases never had a replaceable bush under the transfer lever. The seat was machined direct into the aluminium of the front case, and the steel locating pins are cast into the sides and cannot be replaced. Although splash lubricated from the gear oil, the steel lever would eventually wear into the softer alloy. On a transfer case that has seen a bit of use, this becomes a weak point and either requires major surgery, or replacement of the front case. Many moons ago (early 80's), Super Suzy in Qld used to do exchange front housings with the alloy seat milled out and a spherical seat bronze bush put in place, and the cast pins drilled out and Sierra threaded pins put in. I have no idea who would do the same sort of work these days, it might have to be a one off job with an engineering shop. Thank you 303zuke . Your a wealth of knowledge .
|
|
| Author: | 2stroker [ Sat May 29, 2010 3:02 am ] |
| Post subject: | Re: LJ Transfer Shifter |
I have a supersuzi transfer box in the shed I will dig it out and post some picks for you Highway_Star. Supersuzi also did exchange boxes with either higher or lower gearing depending on what you required. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|