| auszookers.com https://auszookers.com/forum/ |
|
| Jimny coil spacers https://auszookers.com/forum/viewtopic.php?f=5&t=12249 |
Page 1 of 1 |
| Author: | Buzz [ Fri May 28, 2010 2:04 am ] |
| Post subject: | Jimny coil spacers |
Hi All, I'm new to this site & have a question you may be able to help me with... I've just ordered a set of 30mm coil spacers, mainly to fit my bigger tyres better rather than for clearance. The ones pictured on the site I got them and on posts here (Installing coil spacers on a Jimny - Zukenutter) seem to have a bigger bit on the inside of the ring that fits inside the spring. The ones I've received are flat with nothing to go inside the spring and no groove for the spring to fit into. Any ideas if these are the correct ones? Thanks for your help! |
|
| Author: | zukenutter [ Fri May 28, 2010 2:27 am ] |
| Post subject: | Re: Jimny coil spacers |
Hi Buzz, welcome to the site. I had some small flat ones originally which worked fine. Mine bedded in once the weight of the car settled onto them. The ones I have now from ODA1 are a much more secure fit and have the inner lip/cone/wall thingy as well to guide the spring. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|