| auszookers.com https://auszookers.com/forum/ |
|
| need gvm upgread https://auszookers.com/forum/viewtopic.php?f=5&t=12329 |
Page 1 of 1 |
| Author: | got_bar_work [ Mon May 31, 2010 4:55 am ] |
| Post subject: | need gvm upgread |
does any one know what the axel load capacity is of a lwb vit and lwb gv do they use any of the same bearings my vitara is to heavy and i dont want to only have 2 seats need a gvm upgrade but dont want to go to 80 series diff (well do but dont have the coin) |
|
| Author: | joeblow [ Mon May 31, 2010 5:00 am ] |
| Post subject: | Re: need gvm upgread |
a 4 banger estate wagon has an axle loading of 1250 kg's, grand is a little higher. these figures are from suzuki. same bearings (size wise) for most models. |
|
| Author: | got_bar_work [ Mon May 31, 2010 5:16 am ] |
| Post subject: | Re: need gvm upgread |
im a sparky and know nothing of this correct me if im wrong so diff wise they would be the same strength/load rating if they have the same bearings and it would be spring rate and chassis strength determining the lower gvm in the vit then the gv |
|
| Author: | joeblow [ Mon May 31, 2010 5:29 am ] |
| Post subject: | Re: need gvm upgread |
chassis strength plays a small part, bit its mainly axle as well as the diff centre strength. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|