| auszookers.com https://auszookers.com/forum/ |
|
| lubing clutch cable https://auszookers.com/forum/viewtopic.php?f=5&t=12410 |
Page 1 of 1 |
| Author: | zukmeista [ Thu Jun 03, 2010 12:36 am ] |
| Post subject: | lubing clutch cable |
How do you do this? Mine's getting a bit creaky. |
|
| Author: | want33s [ Thu Jun 03, 2010 1:20 am ] |
| Post subject: | Re: lubing clutch cable |
Remove the cable. Hang it from clothes line or similar. Spray or squirt lube between cable and sheath about every 15 minutes until lube is coming out the bottom. Leave another 30 minutes or so then wipe down and refit to car. Motorcycle shops sell little cable oilers but not sure if they'll fit to a car clutch cable.
|
|
| Author: | Rusho [ Thu Jun 03, 2010 1:35 am ] |
| Post subject: | Re: lubing clutch cable |
If it is real bad you may need to replace it. Here is an inner and an outer wall of the cable, if it's an old cable they could be rubbing. This happened to mine, I replace it because it was annoying the he'll out of me |
|
| Author: | removed1 [ Fri Jun 04, 2010 6:39 am ] |
| Post subject: | Re: lubing clutch cable |
OMG WD-40... May as well as use kero... If your wanting to clean the cable itself use turps and work it down the cable shroud, and if you wana lube it use Lannox PTFE when its completely dry. You will notice the difference, this is after all the years in the game with high end mountain bikes and roadie shifters... They have to be "perfect' or else... |
|
| Author: | Crunched [ Fri Jun 04, 2010 7:38 am ] |
| Post subject: | Re: lubing clutch cable |
SLAZMO wrote: You will notice the difference, this is after all the years in the game with high end mountain bikes and roadie shifters... They have to be "perfect' or else...
Well, in "all the years" that I have been playing cars, WD40 has always done the job for me... For my mtb, I just replace the inners...and occassionally the outers. |
|
| Author: | zukmeista [ Tue Jun 08, 2010 1:15 am ] |
| Post subject: | Re: lubing clutch cable |
OK... So how do you remove the clutch cable??? |
|
| Author: | shep [ Tue Jun 08, 2010 2:49 am ] |
| Post subject: | Re: lubing clutch cable |
if you are going to the hassle of removing it i would just replace it. $30 for a new one http://www.bbmmotorsports.com.au/sierra.html |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|