| auszookers.com https://auszookers.com/forum/ |
|
| body lift question, NEW what to look for body lift? https://auszookers.com/forum/viewtopic.php?f=5&t=12500 |
Page 1 of 1 |
| Author: | experament-u2 [ Sun Jun 06, 2010 12:25 am ] |
| Post subject: | body lift question, NEW what to look for body lift? |
how much does a 50mm body lift change the centre of gravity usually? is there a dramatic increase in body roll? im thinking about sorting one out for my SWB grand vit and i dont want my car to become to end over end down a hill, im currently running a 60mm suspension lift and 30s |
|
| Author: | 31zook [ Sun Jun 06, 2010 12:28 am ] |
| Post subject: | Re: body lift question, body roll? |
it's only 50mm... don't worry about it. you will probably only notice that it's not scrubbing tyres anymore and that you can work on it sooooo much more easily... |
|
| Author: | Scrawny [ Sun Jun 06, 2010 12:28 am ] |
| Post subject: | Re: body lift question, body roll? |
Won't make any difference at all |
|
| Author: | shep [ Sun Jun 06, 2010 12:29 am ] |
| Post subject: | Re: body lift question, body roll? |
i didn't notice a difference on my sierra. the center of gravity doesn't change as much as the body lift because all the heavy stuff doesn't move. |
|
| Author: | 89_tintop [ Sun Jun 06, 2010 12:32 am ] |
| Post subject: | Re: body lift question, body roll? |
x 2 to what shep said.. i have driven a few mates sierras at different stages of there builds and it mate no notable difference. |
|
| Author: | experament-u2 [ Sun Jun 06, 2010 12:57 am ] |
| Post subject: | Re: body lift question, body roll? |
excellent thanks for the quick replies guys i recon i will sort out a body lift after payday |
|
| Author: | experament-u2 [ Tue Jun 08, 2010 5:44 am ] |
| Post subject: | Re: body lift question, body roll? |
ok for the body lift on a GV what are things i will need to watch out for, the normal wires lines going to anything coolant hoses hand brake cable (im a little worried about this as its pretty tight as it is) is there anything else iv missed off the top of my head, also has anyone who has already done a body lift on a gv tell me if the gear sticks hit at all on the tunnel? |
|
| Author: | atari4x4 [ Tue Jun 08, 2010 7:48 am ] |
| Post subject: | Re: body lift question, NEW what to look for body lift? |
maybe bump a PM to muguwi as he bodylifted his GV. does yours have the strut brace? |
|
| Author: | experament-u2 [ Tue Jun 08, 2010 1:06 pm ] |
| Post subject: | Re: body lift question, NEW what to look for body lift? |
no strut brace mate, |
|
| Author: | Myles [ Sun Jun 13, 2010 2:01 pm ] |
| Post subject: | Re: body lift question, NEW what to look for body lift? |
What about in a coily? Does it make much of a difference cog wise? |
|
| Author: | 89_tintop [ Sun Jun 13, 2010 11:42 pm ] |
| Post subject: | Re: body lift question, NEW what to look for body lift? |
Myles wrote: What about in a coily? Does it make much of a difference cog wise?
bot really mate... you may notice small change to it.... but it would be very small. you could always offset the change with some larger off set rims and bigger tyres........ |
|
| Author: | gravity_powered [ Tue Jun 15, 2010 11:20 am ] |
| Post subject: | Re: body lift question, NEW what to look for body lift? |
Steering shaft not being long enough and center console getting in the way of 2nd, 4th and reverse after lift are issues I've read about |
|
| Author: | joeblow [ Tue Jun 15, 2010 11:24 am ] |
| Post subject: | Re: body lift question, NEW what to look for body lift? |
gravity_powered wrote: Steering shaft not being long enough
not a drama with one of these.....
|
|
| Author: | steak_knife [ Tue Jun 15, 2010 11:29 am ] |
| Post subject: | Re: body lift question, NEW what to look for body lift? |
experament-u2 wrote: no strut brace mate,
I'd be looking into getting one. |
|
| Author: | atari4x4 [ Tue Jun 15, 2010 11:30 am ] |
| Post subject: | Re: body lift question, NEW what to look for body lift? |
there was a bloke that was selling one of those extensions just like that one on ebay a while ago |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|