auszookers.com
https://auszookers.com/forum/

Which 1.6 timing belt? What seal?
https://auszookers.com/forum/viewtopic.php?f=5&t=12563		 Page 1 of 1
Author:  Red_October [ Mon Jun 07, 2010 11:24 am ]
Post subject:  Which 1.6 timing belt? What seal?
I have a 16v head on a G16A block. Which timing belt kit do I get; the G16A or the G16B? Or are they one and the same?

Also, the gasket on the back of the block that sits behind a plate that's surrounds the rear main seal... what's this gasket called? Mine's leaking. (don't wanna take a pic, it's freezing outside!)

Cheers,
Jimmy :P
Author:  losfer [ Mon Jun 07, 2010 11:42 am ]
Post subject:  Re: Which 1.6 timing belt? What seal?
the g16a block and g16b block are essentially the same , they just have different ancillery bolt lugs on the blocks , they are both identical internally and in block height.
so if you are using the 16 valve head you use the kit with the t212 belt
8 valve head you use the t164 belt.

the plate is the rear main seal housing , so you need a rear main seal housing gasket , hard to think it would leak though
Author:  Red_October [ Mon Jun 07, 2010 11:47 am ]
Post subject:  Re: Which 1.6 timing belt? What seal?
Excellent! Cheers losfer :P

Yeah I had a good look at the gasket and it's definitely leaking. I'm also doing the rear main for good measure.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/