| auszookers.com https://auszookers.com/forum/ |
|
| Vitara steering stabilizer ? https://auszookers.com/forum/viewtopic.php?f=5&t=12599 |
Page 1 of 1 |
| Author: | Mick70b [ Wed Jun 09, 2010 7:51 am ] |
| Post subject: | Vitara steering stabilizer ? |
Is a steering stabilizer necessary for a Vitara? Does anyone here run one? I have seen tough dog ones on ebay and a Calmini one with a brace and just want to know what the go is with them? Calmini indicates that it helps when running larger tyres and some lift? |
|
| Author: | buzbox [ Wed Jun 09, 2010 8:04 am ] |
| Post subject: | Re: Vitara steering stabilizer ? |
It suppose to help the steering feel better by helping control the rebound created by larger tyres. Is it worth it? I dunno, in theory it makes sense and of course If it looks good, It must be good, Right? I know that they make a difference with 4B's that don't have power steering and are a standard item, but I don't think it would make a huge difference on a vitara. I have thought about getting one, but like you I don't think it'll be necessary. |
|
| Author: | ozhummer [ Wed Jun 09, 2010 8:44 am ] |
| Post subject: | Re: Vitara steering stabilizer ? |
no difference with power steering.. But - provides a great mounting bracket for a fold under bash plate ! |
|
| Author: | Mick70b [ Thu Jun 10, 2010 3:33 am ] |
| Post subject: | Re: Vitara steering stabilizer ? |
Thanks for the info. Thats what I liked about the Calmini one was that you could mount the bash plate to the brace, but it could probably get a similar brace made up here and fit a bash plate to it. |
|
| Author: | buzbox [ Thu Jun 10, 2010 7:43 am ] |
| Post subject: | Re: Vitara steering stabilizer ? |
Outdoor auto have stabalisers and bash plates for the vitara |
|
| Author: | atari4x4 [ Thu Jun 10, 2010 9:13 am ] |
| Post subject: | Re: Vitara steering stabilizer ? |
Mick70b wrote: Thanks for the info. Thats what I liked about the Calmini one was that you could mount the bash plate to the brace, but it could probably get a similar brace made up here and fit a bash plate to it.
the calmini brace/steering stabilzer will not fit the SV420's/SV620's due to the extra width in the chassis rails.... eddie at Fraud Wheel Drive U$A sold one to me telling me it would fit... if only he knew the product he sells |
|
| Author: | Mick70b [ Tue Jun 15, 2010 5:02 am ] |
| Post subject: | Re: Vitara steering stabilizer ? |
Thanks for that Atari, would have been pi$$ed if I purchased one and found that out the hard way mate. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|