more or less, youll need to make sure you have 26 splines couplings to fit your driveshafts and the drivers CV wont fit properly anymore but it will sort of work
or get onto Joeblow here and get a factory modded airlocker that will work with a gv
| auszookers.com https://auszookers.com/forum/ |
|
| 2003 GV front auto lokka help???? https://auszookers.com/forum/viewtopic.php?f=5&t=12825 |
Page 1 of 1 |
| Author: | xgsteve [ Thu Jun 17, 2010 8:26 am ] |
| Post subject: | 2003 GV front auto lokka help???? |
Hi all, ive got a 2003 auto 2.5 grand vitara and im wanting to fit a front lokka, ive checked and its already got a steel front diff, so can anyone tell me if this can be done and what i need?????? |
|
| Author: | royce [ Thu Jun 17, 2010 8:41 am ] |
| Post subject: | Re: 2003 GV front auto lokka help???? |
Free wheeling hubs and i would think the hemisphere from a vit diff |
|
| Author: | xgsteve [ Thu Jun 17, 2010 9:19 am ] |
| Post subject: | Re: 2003 GV front auto lokka help???? |
what do you mean by the hemisphere? |
|
| Author: | royce [ Thu Jun 17, 2010 9:45 am ] |
| Post subject: | Re: 2003 GV front auto lokka help???? |
the part the crownwheel bolts to, if you were getting an airlocker you wouldnt need this but the brand 'lokka' fits inside this and the gv one is different |
|
| Author: | xgsteve [ Thu Jun 17, 2010 9:59 am ] |
| Post subject: | Re: 2003 GV front auto lokka help???? |
sorry i had a mental blank, so ive got a 1991 vitara complete front diff with an alloy carrier in the shed, so can i take the hemisphere out of that and fit the lokka and my crown wheel and bolt it in? |
|
| Author: | royce [ Thu Jun 17, 2010 10:07 am ] |
| Post subject: | Re: 2003 GV front auto lokka help???? |
more or less, youll need to make sure you have 26 splines couplings to fit your driveshafts and the drivers CV wont fit properly anymore but it will sort of work or get onto Joeblow here and get a factory modded airlocker that will work with a gv
|
|
| Author: | xgsteve [ Thu Jun 17, 2010 10:15 am ] |
| Post subject: | Re: 2003 GV front auto lokka help???? |
what do you mean wont fit properly but will sort off work? |
|
| Author: | royce [ Thu Jun 17, 2010 10:22 am ] |
| Post subject: | Re: 2003 GV front auto lokka help???? |
The position of teh clip that holds the driveshaft in is different on a gv to a vit so it can slide in and out by about 5mm, people dont seem to have too much drama with it |
|
| Author: | xgsteve [ Thu Jun 17, 2010 10:34 am ] |
| Post subject: | Re: 2003 GV front auto lokka help???? |
cheers thanks for the info, ill start the swap this weekend |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|