It is currently Wed Jul 29, 2026 5:24 am
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 14 posts ] 
Author Message

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Fri Jun 18, 2010 6:22 am 
Reply with quote Top  
today i went to autobarn and got some spark plugs for my suzuki sierra, but i forgot to take a sample so they had to look it up only problem was that i told them that i might have a 1.6 vatara head on my 1.3 block, im not sure as the seller said it hat a 1.6 head, so i consumed it was, so when i came home with the spark plugs which are BP5ES. i checked with the original ones and they were BP6ES, so im just wondering will they fit and wat spark plugs fit in a 1.6 head and wat will fit in a 1.3 head, as i dont have a clue wat head it is

much appreciated

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Jun 18, 2010 6:40 am 
Reply with quote Top  
use the BP6ES plugs as they are suited better to todays shitty fuel better.

B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Fri Jun 18, 2010 6:46 am 
Reply with quote Top  
dam ok, well ill have to take the spark plugs back and get the right ones

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Fri Jun 18, 2010 7:06 am 
Reply with quote Top  
what will happen if i use the BP5ES ones?

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

 Profile  

Offline
User avatar

Joined: Sun Apr 06, 2008 11:30 pm
Posts: 184
Location: Brisbane

Post Posted: Fri Jun 18, 2010 7:13 am 
Reply with quote Top  
in spark plugs the numbers are references to the temperature of the plugs,
in the NGK's the lower the number the hotter the plug..
http://www.ngksparkplugs.com/tech_suppo ... p?mode=nml

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Fri Jun 18, 2010 7:20 am 
Reply with quote Top  
well the plugs i bought are NGK BP5ES so your saying theyll run hotter then the BP6ES ones

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

 Profile  

Offline
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 97
Location: Noosa QLD

Post Posted: Fri Jun 18, 2010 7:36 am 
Reply with quote Top  
yeah they are hotter. i dont see it being a major problem. the plugs will probably just wear out a bit faster. you can change them if you want but if it was me i would just use them. but i am lazy.

_________________
Sierra, Ute Chop, Tube Tray, 1.6 EFI, locked F&R,

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sat May 30, 2009 11:30 pm
Posts: 2770
Location: sunny coast
Vehicle: jimny

Post Posted: Fri Jun 18, 2010 8:02 am 
Reply with quote Top  
just be aware that they are a hotter plug, dont do any extended high speed driving, if it was me i would run em, would only be a worry if it was a bp4es etc but one heat range is usually ok

 Profile  

Offline

Joined: Sat Jul 18, 2009 11:30 pm
Posts: 2372
Location: Ballarat, VIC

Post Posted: Fri Jun 18, 2010 8:05 am 
Reply with quote Top  
If your timing has been advanced for higher octane fuel, you may find you experience predetonation due to the spark plugs getting too hot.
Which is why many people swap to the BP6ES.

If you look at your old plugs, and they are fouled up internally, your plugs are running too cold and the BP5ES would be better suited.
Also consider tuning the carby if they are heavily fouled.

This is some useful info posted a few months ago.
I always have a good squiz at my plugs when servicing to see whats going on during combustion.
http://www.4secondsflat.com/Spark_plug_reading.html

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Fri Jun 18, 2010 9:18 am 
Reply with quote Top  
ok thanks guys, they are in ill see wat happens

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

 Profile  

Offline
User avatar

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Post Posted: Fri Jun 18, 2010 9:34 am 
Reply with quote Top  
freshly rebuilt engines will have a higher compression and on todays fuel pinging is quite likely to occur. if this happends you should adjust your timing and run a cooler plug. Pinging can happen even without you knowing if things are not right inside your engine. Todays fuel is crap compared to what it was when the suzuki was built. My newly rebuilt motor has the same compression as it says in the FSMbut it pings on everything but the highest octane fuel and only with the timing set back at 4deg.


I run the BP6ES plugs. made a huge difference in my motor .


B4T

_________________
B4T


Built by me to be driven like a rental

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Fri Jun 18, 2010 10:19 am 
Reply with quote Top  
Built4thrashing wrote:
freshly rebuilt engines will have a higher compression and on todays fuel pinging is quite likely to occur. if this happends you should adjust your timing and run a cooler plug. Pinging can happen even without you knowing if things are not right inside your engine. Todays fuel is crap compared to what it was when the suzuki was built. My newly rebuilt motor has the same compression as it says in the FSMbut it pings on everything but the highest octane fuel and only with the timing set back at 4deg.


I run the BP6ES plugs. made a huge difference in my motor .


B4T


i have a vitara head so thats more compression ny way then the sierra head, i need to get my timing looked at as i have pre ignition and my car runs like shit

 Profile  

Offline
omnipotent being
omnipotent being
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Post Posted: Fri Jun 18, 2010 10:38 am 
Reply with quote Top  
ummmm 1.3 is BP5es, go look under bonnets :)

1.3 in a swift is a 6, 1.6 is a 6

just fit em, youll never know the difference, shit my sierra had every combination of BP, BK, BC, BPR, BKR, BCP, in 5 6 and 7 and youd never know the difference

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Post Posted: Fri Jun 18, 2010 10:41 am 
Reply with quote Top  
royce wrote:
ummmm 1.3 is BP5es, go look under bonnets :)

1.3 in a swift is a 6, 1.6 is a 6

just fit em, youll never know the difference, shit my sierra had every combination of BP, BK, BC, BPR, BKR, BCP, in 5 6 and 7 and youd never know the difference


yea the bp6es came out of it, i just end up putting the bp5es in i couldnt be bothered taking them back, got a discount ny way

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 80 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours