| auszookers.com https://auszookers.com/forum/ |
|
| carby gasket help https://auszookers.com/forum/viewtopic.php?f=5&t=12863 |
Page 1 of 1 |
| Author: | zooky08 [ Fri Jun 18, 2010 11:36 pm ] |
| Post subject: | carby gasket help |
hey fellas i have recently taking the carby off my suzuki sierra to replace the gasket between the caby nd template, i have made a gasket out of gasket paper but im not sure i made it properly as i destoyed the old one when getting it off. so just wondering if any one knows were i can find a pattern to see if its the same, oh and all so is there ment to be a gasket between the template and the manafold, because mine doesnt thanks |
|
| Author: | zuki [ Fri Jun 18, 2010 11:48 pm ] |
| Post subject: | Re: carby gasket help |
zooky08 wrote: hey fellas i have recently taking the carby off my suzuki sierra to replace the gasket between the caby nd template, i have made a gasket out of gasket paper but im not sure i made it properly as i destoyed the old one when getting it off. so just wondering if any one knows were i can find a pattern to see if its the same, oh and all so is there ment to be a gasket between the template and the manafold, because mine doesnt
thanks Mate, It would be better to go purchase the 2 gaskets seriously thy're only a couple of dollars each and for the sake of acouple of dollars it is not worth the hassle. David |
|
| Author: | zooky08 [ Fri Jun 18, 2010 11:53 pm ] |
| Post subject: | Re: carby gasket help |
yea i know they are few dollars but i need to go some were and i didnt know were to get some from so i just quickly went and bought gasket paper so is there ment be a second gasket |
|
| Author: | zuki [ Sat Jun 19, 2010 12:35 am ] |
| Post subject: | Re: carby gasket help |
zooky08 wrote: yea i know they are few dollars but i need to go some were and i didnt know were to get some from so i just quickly went and bought gasket paper so is there ment be a second gasket
Yes one between the manifold and spacer and one between the spacer and carby base. Make sure all holes air holes are not covered with gasket paper. or it won't run properly David |
|
| Author: | zooky08 [ Sat Jun 19, 2010 1:48 am ] |
| Post subject: | Re: carby gasket help |
ok thanks that would be my problem why it runs shit lol |
|
| Author: | zooky08 [ Sat Jun 19, 2010 7:57 am ] |
| Post subject: | Re: carby gasket help |
does any one know how much a carby rebuild or to recon my carby would be |
|
| Author: | suzibob [ Sat Jun 19, 2010 10:45 am ] |
| Post subject: | Re: carby gasket help |
Rebuild kits are about $60. You get everything you need to rebuild. Gaskets, accel pump, washers, needle and seat etc. Repco, carbitz, bursons will usually stock them or point you in the right direction... |
|
| Author: | suzibob [ Sat Jun 19, 2010 10:46 am ] |
| Post subject: | Re: carby gasket help |
Sorry, and rebuilds or exchanges by a pro will cost you around $400 I think.. |
|
| Author: | zooky08 [ Sat Jun 19, 2010 11:00 am ] |
| Post subject: | Re: carby gasket help |
suzibob wrote: Sorry, and rebuilds or exchanges by a pro will cost you around $400 I think..
stuff that way out of my range, might source out a rebuild kit |
|
| Author: | suzibob [ Sat Jun 19, 2010 12:28 pm ] |
| Post subject: | Re: carby gasket help |
Yeah mate it's a bit pricey. Just get a rebuild kit, download the manual and you should work it out. I knew Jack sh$t about carbies before the Sierra, - always had injected cars, but I've learnt valuable info from doing it myself. Also helps to know, especially if you breakdown out in the bush, you"ll have a general idea on where to start looking and quick fixes. |
|
| Author: | zooky08 [ Sat Jun 19, 2010 9:52 pm ] |
| Post subject: | Re: carby gasket help |
suzibob wrote: Yeah mate it's a bit pricey. Just get a rebuild kit, download the manual and you should work it out. I knew Jack sh$t about carbies before the Sierra, - always had injected cars, but I've learnt valuable info from doing it myself. Also helps to know, especially if you breakdown out in the bush, you"ll have a general idea on where to start looking and quick fixes.
were is the best place to get the kit from |
|
| Author: | want33s [ Sat Jun 19, 2010 10:41 pm ] |
| Post subject: | Re: carby gasket help |
zooky08 wrote: were is the best place to get the kit from suzibob wrote: Rebuild kits are about $60. You get everything you need to rebuild. Gaskets, accel pump, washers, needle and seat etc.
Repco, carbitz, bursons will usually stock them or point you in the right direction... |
|
| Author: | zooky08 [ Sat Jun 19, 2010 11:34 pm ] |
| Post subject: | Re: carby gasket help |
want33s wrote: zooky08 wrote: were is the best place to get the kit from suzibob wrote: Rebuild kits are about $60. You get everything you need to rebuild. Gaskets, accel pump, washers, needle and seat etc. Repco, carbitz, bursons will usually stock them or point you in the right direction... haha oops blonde moment 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|