auszookers.com
https://auszookers.com/forum/

how wide
https://auszookers.com/forum/viewtopic.php?f=5&t=12870		 Page 1 of 1
Author:  _noddy [ Sat Jun 19, 2010 3:04 am ]
Post subject:  how wide
how wide is a nt suzuki with stock tyres and rims on it.. from out side to out side???
Author:  303zuke [ Sat Jun 19, 2010 3:21 am ]
Post subject:  Re: how wide
1460mm for a NT with the standard plastic/rubber type flares. If it's a rarer JA spec one with 6.00-16 bar treads and no flares, it's 1395mm.


And somebody's gonna wanna know: The WT is 1529mm
Author:  _noddy [ Sat Jun 19, 2010 3:28 am ]
Post subject:  Re: how wide
yes yes thanks for that .. Now im going to get my new suzuki that has no rust in it and guess how much im paying for it ..hahahah
Author:  zuki [ Sat Jun 19, 2010 3:34 am ]
Post subject:  Re: how wide
_noddy wrote:
yes yes thanks for that .. Now im going to get my new suzuki that has no rust in it and guess how much im paying for it ..hahahah


Shep will say $500
Author:  shakes [ Sat Jun 19, 2010 3:40 am ]
Post subject:  Re: how wide
_noddy wrote:
yes yes thanks for that .. Now im going to get my new suzuki that has no rust in it and guess how much im paying for it ..hahahah


i bet as soon as you lift the car/pull the side skirt trim thing/look inside the rear gaurds you'll find some.

if it's more than $400 you paid too much
Author:  lump_a_charcoal [ Sat Jun 19, 2010 4:14 am ]
Post subject:  Re: how wide
Hey it's _noddy again!
Author:  Tonka4 [ Sat Jun 19, 2010 7:39 am ]
Post subject:  Re: how wide
how do you tell if all you have is a rolling chasis, no body. is there key things to look at/for. Thanks.
Author:  Zook_Fan [ Sat Jun 19, 2010 7:45 am ]
Post subject:  Re: how wide
spring mount placement. if the rear spring's front mount is not inline with the chassis it is a WT. if they are it is a NT. or measure it because you have the measurements above
Author:  barneyszookin [ Sun Jun 20, 2010 1:41 pm ]
Post subject:  Re: how wide
303zuke wrote:
And somebody's gonna wanna know: The WT is 1529mm


haha i was going to ask... until i kept reading! ;)
Author:  Tonka4 [ Mon Jun 21, 2010 6:44 am ]
Post subject:  Re: how wide
Thanks for that ZooK_Fan
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/