Yeah the pinion gears I meant...
| auszookers.com https://auszookers.com/forum/ |
|
| What is the... https://auszookers.com/forum/viewtopic.php?f=5&t=12891 |
Page 1 of 1 |
| Author: | lump_a_charcoal [ Sun Jun 20, 2010 4:22 am ] |
| Post subject: | What is the... |
Curved washer/shim called that sits outside the side gears in a Sierra centre? |
|
| Author: | 31zook [ Sun Jun 20, 2010 4:26 am ] |
| Post subject: | Re: What is the... |
do you mean a thrust washer? |
|
| Author: | lump_a_charcoal [ Sun Jun 20, 2010 4:28 am ] |
| Post subject: | Re: What is the... |
Don't know - Do I? It sits inbetween the sidegear and the carrier, on the pin. It is slightly curved, to match the profile of the side gear. |
|
| Author: | Scrawny [ Sun Jun 20, 2010 4:33 am ] |
| Post subject: | Re: What is the... |
Sounds like a thrust washer |
|
| Author: | 31zook [ Sun Jun 20, 2010 4:37 am ] |
| Post subject: | Re: What is the... |
nope, like inside the carrier. it's allot like a bowl with the bottom cut out of it. do you need some? |
|
| Author: | lump_a_charcoal [ Sun Jun 20, 2010 4:39 am ] |
| Post subject: | Re: What is the... |
Yeah I need one - Got one? |
|
| Author: | BlueSuzy [ Sun Jun 20, 2010 4:59 am ] |
| Post subject: | Re: What is the... |
I would probably. Why u need one? |
|
| Author: | lump_a_charcoal [ Sun Jun 20, 2010 5:35 am ] |
| Post subject: | Re: What is the... |
Because I have 3, and need 4 to make a carrier complete. |
|
| Author: | 303zuke [ Sun Jun 20, 2010 5:43 am ] |
| Post subject: | Re: What is the... |
The washers beside the Side Gears are flat. The ones beside the Pinion Gears are dished. In a 1.3 WT Sierra diff they are known officially as a....... Washer (P/No 09164-15006) |
|
| Author: | lump_a_charcoal [ Sun Jun 20, 2010 6:06 am ] |
| Post subject: | Re: What is the... |
|
Yeah the pinion gears I meant... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|