auszookers.com
https://auszookers.com/forum/

1/8" BSP poppet type breathers ?
https://auszookers.com/forum/viewtopic.php?f=5&t=12901		 Page 1 of 1
Author:  brindog [ Sun Jun 20, 2010 7:40 am ]
Post subject:  1/8" BSP poppet type breathers ?
Can some one tell me what 1/8" BSP poppet type breathers are.
Are they the size of a Jimny ?

Interested in these:Billet Breathers

would they fit straight on ?

Yeah I know there expensive, but I want to keep it neat.
Thanks.
Author:  royce [ Sun Jun 20, 2010 7:57 am ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
no, youll need to tap yours to that thread

1/2" TP hose is pretty neat, and only about $20 for a cars worth, cant see the real need for a filter but you could stick something neat on the end and still be in front
Author:  foonji [ Sun Jun 20, 2010 9:08 am ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
You can buy those little nuematic filters (as seen in that kit) from RS Electronics... then get some fittings to attach them to hose from Enzed/Pirtek.
Author:  BlueSuzy [ Sun Jun 20, 2010 9:42 am ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
They are just pneumatic exhaust mufflers. Not filters.

I dont run any filters, just hose.
Author:  gravity_powered [ Sun Jun 20, 2010 10:07 am ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
Get a couple of nitro RC car air filters from a hobby shop if you want neat filters.
Author:  eldo [ Sun Jun 20, 2010 10:25 am ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
really if filters were necessary they would be on the stock breathers
Author:  BlueSuzy [ Sun Jun 20, 2010 12:35 pm ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
eldo wrote:
really if filters were necessary they would be on the stock breathers


x2.
Author:  brindog [ Sun Jun 20, 2010 9:20 pm ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
Thanks for the feedback guys will have a look around.
Author:  2stroker [ Sun Jun 20, 2010 11:56 pm ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
eldo wrote:
really if filters were necessary they would be on the stock breathers


I think the idea is just to have something on the end of the hose that will at least stop wasps, insects etc from getting in. on a standard breather the cap stops the insects
Author:  mrw82 [ Mon Jun 21, 2010 1:45 am ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
eldo wrote:
really if filters were necessary they would be on the stock breathers


and if diff breather extensions were necessary they would be fitted from factory aswell.......... yeah right.

just cos suzuki didn't put it there doesn't mean it's not a good idea.
Author:  royce [ Mon Jun 21, 2010 1:58 am ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
mrw82 wrote:
and if diff breather extensions were necessary they would be fitted from factory aswell.......... yeah right.


Vitaras have them :)
Author:  wagola [ Mon Jun 21, 2010 2:45 am ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
gravity_powered wrote:
Get a couple of nitro RC car air filters from a hobby shop if you want neat filters.


brilliant
ive been trying to find something like that for ages.
Author:  TryHard [ Mon Jun 21, 2010 6:07 am ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
hey depending on how much ur willing to spend http://cgi.ebay.com.au/Diff-Gearbox-Tra ... 19bd46c779
Author:  gravity_powered [ Mon Jun 21, 2010 1:00 pm ]
Post subject:  Re: 1/8" BSP poppet type breathers ?
wagola wrote:
gravity_powered wrote:
Get a couple of nitro RC car air filters from a hobby shop if you want neat filters.


brilliant
ive been trying to find something like that for ages.


Post some pics up when you're done. I haven't done it myself, just thought of it when reading this topic.

GV's have good breathers up high in the engine bay from the factory :wink:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/