| auszookers.com https://auszookers.com/forum/ |
|
| what size jets for webber https://auszookers.com/forum/viewtopic.php?f=5&t=12932 |
Page 1 of 1 |
| Author: | Jord [ Mon Jun 21, 2010 8:14 am ] |
| Post subject: | what size jets for webber |
hi all, im sure this has been coverd before but i couldnt find anything in the search. Im after some info on what jetting a weber 32/36 would need to suit a 1.3 sierra? i got myself a cheapy with manual choke, but it deosnt have right size jets so im going to perform a rebuild and rejett. thanks jordan |
|
| Author: | unique_seek [ Mon Jun 21, 2010 8:25 am ] |
| Post subject: | Re: what size jets for webber |
I put a 32/36 off a 2L escort onto a vit 1.6...never got around to jetting it...here is some info that might help.. http://datsun1200.com/modules/mediawiki ... DGV_Tuning |
|
| Author: | unique_seek [ Mon Jun 21, 2010 8:26 am ] |
| Post subject: | Re: what size jets for webber |
jetting charts.. http://www.triumphspitfire.com/jets.html |
|
| Author: | unique_seek [ Mon Jun 21, 2010 8:28 am ] |
| Post subject: | Re: what size jets for webber |
http://www.triumphspitfire.com/weber.html |
|
| Author: | JrZook [ Mon Jun 21, 2010 1:12 pm ] |
| Post subject: | Re: what size jets for webber |
Mains: 140 primary 135 secondary idles 60 primary 50 secondary Setup on a stock 1.3, extractors and 2 inch system. Returns roughly 13:1 AFR throughout the rev range. Dan |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|