auszookers.com
https://auszookers.com/forum/

PROBLEM filling gearbox, not through the fill hole
https://auszookers.com/forum/viewtopic.php?f=5&t=12988		 Page 1 of 2
Author:  experament-u2 [ Wed Jun 23, 2010 7:23 am ]
Post subject:  PROBLEM filling gearbox, not through the fill hole
iv finally given up (for now) at getting my stuck fill plug out of my gearbox on my GV, but it deferentially needs a oil change so im thinking if i drain the oil and measure out the right amount could i just pour it in through the gear stick hole?
Author:  ajsr [ Wed Jun 23, 2010 7:42 am ]
Post subject:  Re: filling gearbox, not through the fill hole
yes
Author:  steak_knife [ Wed Jun 23, 2010 7:51 am ]
Post subject:  Re: filling gearbox, not through the fill hole
ajsr wrote:
yes


x2, slowly tho, I've done it heap's of time's.. :P
Author:  christover1 [ Wed Jun 23, 2010 11:11 am ]
Post subject:  Re: filling gearbox, not through the fill hole
Owned my old zook for over 12 years, even with different gearboxes could never get the filler out..been filling thru the gear stick hole forever :))
Author:  Benz [ Wed Jun 23, 2010 11:26 am ]
Post subject:  Re: filling gearbox, not through the fill hole
was just thinking "sweet might do that next time"
but jimnys have a funny gear stick setup =[
Author:  christover1 [ Wed Jun 23, 2010 11:31 am ]
Post subject:  Re: filling gearbox, not through the fill hole
I had to fill front diff thru breather for ages, too. had a small funnel, and a lot of patience :)
Can help a lot if you warm the diff oil first.
Author:  experament-u2 [ Wed Jun 23, 2010 1:06 pm ]
Post subject:  Re: filling gearbox, not through the fill hole
thank you gentlemen, my gearbox will soon be all nice a lubed up :)
Author:  gravity_powered [ Thu Jun 24, 2010 9:36 am ]
Post subject:  Re: filling gearbox, not through the fill hole
Since when do territorians change the oil in anything? :P

I had to drain the oil out of my transfer through the front driveshaft hole :oops:
Author:  steak_knife [ Thu Jun 24, 2010 9:58 am ]
Post subject:  Re: filling gearbox, not through the fill hole
gravity_powered wrote:
Since when do territorians change the oil in anything? :P

I had to drain the oil out of my transfer through the front driveshaft hole :oops:


:lol: :lol: I love the look on apprentice's face's when that happens.. :lol: :lol: :lol: :lol:
Author:  Hybrid [ Thu Jun 24, 2010 10:05 am ]
Post subject:  Re: filling gearbox, not through the fill hole
steknig wrote:

:lol: :lol: I love the look on apprentice's face's when that happens.. :lol: :lol: :lol: :lol:


Took my gearbox out twice before finally deciding its not worth trying to get it out full. I love the taste of VMX80 in the morning.
Author:  experament-u2 [ Thu Jun 24, 2010 10:05 am ]
Post subject:  Re: filling gearbox, not through the fill hole
iv got a problem
just tried to fill my gearbox up, drained the oil and pulled the gear stick out
:( started putting it in slowly and nothing it started pooling in the collar bit wear the gear stick goes :( :( :( not going into the gearbox
whats the go
Author:  christover1 [ Thu Jun 24, 2010 10:07 am ]
Post subject:  Re: filling gearbox, not through the fill hole
gravity_powered wrote:
I had to drain the oil out of my transfer through the front driveshaft hole :oops:


being new to vits, I did that accidently during a diff job :roll:
never happened with the sierra
Author:  christover1 [ Thu Jun 24, 2010 10:15 am ]
Post subject:  Re: filling gearbox, not through the fill hole
experament-u2 wrote:
iv got a problem
just tried to fill my gearbox up, drained the oil and pulled the gear stick out
:( started putting it in slowly and nothing it started pooling in the collar bit wear the gear stick goes :( :( :( not going into the gearbox
whats the go

never heard of that b4, may be an air lock, try poking summit to break the seal ?? just guessing, no idea
Author:  Hybrid [ Thu Jun 24, 2010 10:19 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
Could it be something like you removed the gear lever while it was in gear?
Author:  steak_knife [ Thu Jun 24, 2010 10:20 am ]
Post subject:  Re: filling gearbox, not through the fill hole
experament-u2 wrote:
iv got a problem
just tried to fill my gearbox up, drained the oil and pulled the gear stick out
:( started putting it in slowly and nothing it started pooling in the collar bit wear the gear stick goes :( :( :( not going into the gearbox
whats the go


8O It should have a flow back.. 8O

Follow the selector forward a lil, you'll see 4 12mm bolt's in the top of the box, you may have to take the selector box off & pour it in there..

I could of sworn it had a flow back.. 8O
Author:  Joe [ Thu Jun 24, 2010 10:21 am ]
Post subject:  Re: filling gearbox, not through the fill hole
steknig wrote:
experament-u2 wrote:
iv got a problem
just tried to fill my gearbox up, drained the oil and pulled the gear stick out
:( started putting it in slowly and nothing it started pooling in the collar bit wear the gear stick goes :( :( :( not going into the gearbox
whats the go


8O It should have a flow back.. 8O

Follow the selector forward a lil, you'll see 4 12mm bolt's in the top of the box, you may have to take the selector box off & pour it in there..

I could of sworn it had a flow back.. 8O


Its a 1.6 GV would that make a differance :?
Author:  steak_knife [ Thu Jun 24, 2010 10:27 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
It should flow, has to have supply of oil for the selector's, so it need to get back again..
Author:  experament-u2 [ Thu Jun 24, 2010 10:36 am ]
Post subject:  Re: filling gearbox, not through the fill hole
steknig wrote:
experament-u2 wrote:
iv got a problem
just tried to fill my gearbox up, drained the oil and pulled the gear stick out
:( started putting it in slowly and nothing it started pooling in the collar bit wear the gear stick goes :( :( :( not going into the gearbox
whats the go


8O It should have a flow back.. 8O

Follow the selector forward a lil, you'll see 4 12mm bolt's in the top of the box, you may have to take the selector box off & pour it in there..

I could of sworn it had a flow back.. 8O


i think its in gear so i will take it out of gear, i just hope it has flow back
Author:  experament-u2 [ Thu Jun 24, 2010 10:54 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
ok took it out of gear still nothing
i cant work it out

here a pic of my setup
Image
Author:  christover1 [ Thu Jun 24, 2010 11:05 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
card board roll, over hole, blow into it, see if air flows thru, then you least know if oil can get thru, maybe gv is a greased rather than oiled gearstick.
Author:  steak_knife [ Thu Jun 24, 2010 11:07 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
You may have to lower the box a bit, taking the mount out should be enough, & take the selector box off & fill it through there..
Author:  steak_knife [ Thu Jun 24, 2010 11:08 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
christover1 wrote:
card board roll, over hole, blow into it, see if air flows thru, then you least know if oil can get thru, maybe gv is a greased rather than oiled gearstick.


I've rolled em over & oil came out the hole.. 8O
Author:  experament-u2 [ Thu Jun 24, 2010 11:18 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
christover1 wrote:
card board roll, over hole, blow into it, see if air flows thru, then you least know if oil can get thru, maybe gv is a greased rather than oiled gearstick.


just tried giving the gearbox a blow job, seams liek air is flowing through but i cant be sure cause air escapes around it il try again sealing it

tried a bit of hose in the fill plug blowing up and that feels liek air is flowing

steknig wrote:
You may have to lower the box a bit, taking the mount out should be enough, & take the selector box off & fill it through there..


:( still not sure where my selector box is
Author:  christover1 [ Thu Jun 24, 2010 11:25 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
have no idea if it is cold up there at night, but if so, warm the oil first, in a hot bath, or similar, the oil may be too thick to flow werll
Author:  steak_knife [ Thu Jun 24, 2010 11:29 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
christover1 wrote:
have no idea if it is cold up there at night, but if so, warm the oil first, in a hot bath, or similar, the oil may be too thick to flow werll


:P your thinker.. :P
Author:  christover1 [ Thu Jun 24, 2010 11:34 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
steknig wrote:
christover1 wrote:
have no idea if it is cold up there at night, but if so, warm the oil first, in a hot bath, or similar, the oil may be too thick to flow werll


:P your thinker.. :P

Glad ya spelt it that way, or is it a typo :D
Author:  steak_knife [ Thu Jun 24, 2010 11:39 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
christover1 wrote:
steknig wrote:
christover1 wrote:
have no idea if it is cold up there at night, but if so, warm the oil first, in a hot bath, or similar, the oil may be too thick to flow werll


:P your thinker.. :P

Glad ya spelt it that way, or is it a typo :D


:? Um. :?
Author:  shep [ Thu Jun 24, 2010 11:44 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
steknig wrote:
christover1 wrote:
steknig wrote:
christover1 wrote:
have no idea if it is cold up there at night, but if so, warm the oil first, in a hot bath, or similar, the oil may be too thick to flow werll


:P your thinker.. :P

Glad ya spelt it that way, or is it a typo :D


:? Um. :?


haha darwin gets down to about 22degc :lol:
Author:  christover1 [ Thu Jun 24, 2010 11:49 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
OK. Was a wild guess. NT is a big place :))
I have been frozen in the outback at night regularly, away from coast, but that wasn't this time of year.
Author:  shep [ Thu Jun 24, 2010 11:50 am ]
Post subject:  Re: PROBLEM filling gearbox, not through the fill hole
it would be down to 0deg near Alice
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/