I think fatzook is doing up some laser cut perches
| auszookers.com https://auszookers.com/forum/ |
|
| wt into nt https://auszookers.com/forum/viewtopic.php?f=5&t=13079 |
Page 1 of 1 |
| Author: | coneykid [ Sun Jun 27, 2010 1:34 am ] |
| Post subject: | wt into nt |
i been seaching for info but can some one tell me do i have to buy 2 or 4 perches?? is the rear diffs the same purch position |
|
| Author: | lump_a_charcoal [ Sun Jun 27, 2010 1:46 am ] |
| Post subject: | Re: wt into nt |
No, rear diff are different. |
|
| Author: | coneykid [ Sun Jun 27, 2010 1:52 am ] |
| Post subject: | Re: wt into nt |
sweet thanks |
|
| Author: | appsie [ Sun Jun 27, 2010 2:19 am ] |
| Post subject: | Re: wt into nt |
bogfrogs build up probably has the best pics and write up ive seen on it.If you are neat enough geting old perches off they can be used again but ive always seen mates just hack up some 50mm RHS to make new ones |
|
| Author: | lump_a_charcoal [ Sun Jun 27, 2010 2:20 am ] |
| Post subject: | Re: wt into nt |
Sorry, I meant to say both are narrower... |
|
| Author: | Rusho [ Sun Jun 27, 2010 3:45 am ] |
| Post subject: | Re: wt into nt |
I think fatzook is doing up some laser cut perches
|
|
| Author: | Fatzook [ Sun Jun 27, 2010 3:59 am ] |
| Post subject: | Re: wt into nt |
Rusho wrote: I think fatzook is doing up some laser cut perches
Yeah. Pm me if you don't have the patience to remove the original perches in a manner that will allow you to re-use them
|
|
| Author: | steak_knife [ Sun Jun 27, 2010 4:17 am ] |
| Post subject: | Re: wt into nt |
Fatzook wrote: Rusho wrote: I think fatzook is doing up some laser cut perches Yeah. Pm me if you don't have the patience to remove the original perches in a manner that will allow you to re-use them That make's it a whole lot easier... 
|
|
| Author: | lump_a_charcoal [ Sun Jun 27, 2010 5:31 am ] |
| Post subject: | Re: wt into nt |
Fatzook, how much for 4 perches? |
|
| Author: | Fatzook [ Sun Jun 27, 2010 6:55 am ] |
| Post subject: | Re: wt into nt |
lump_a_charcoal wrote: Fatzook, how much for 4 perches?
PM me dude Royce no likey businesses pedaling their shit in tech threads 
|
|
| Author: | coneykid [ Mon Jun 28, 2010 12:08 am ] |
| Post subject: | Re: wt into nt |
ill attack them soon and let ya know |
|
| Author: | BlueSuzy [ Mon Jun 28, 2010 12:29 am ] |
| Post subject: | Re: wt into nt |
I think your new centres have nt flnges on them also..Weird year model/changeover. |
|
| Author: | appsie [ Tue Jun 29, 2010 8:07 am ] |
| Post subject: | Re: wt into nt |
so would they still be 3.7s like WTs ??? meaning hed be better off running his 3.9 centres and stock NT flanges in his rig. |
|
| Author: | Fatzook [ Tue Jun 29, 2010 8:29 am ] |
| Post subject: | Re: wt into nt |
appsie wrote: so would they still be 3.7s like WTs ??? meaning hed be better off running his 3.9 centres and stock NT flanges in his rig.
Yeah he would be better off with the NT centres |
|
| Author: | steak_knife [ Tue Jun 29, 2010 8:30 am ] |
| Post subject: | Re: wt into nt |
appsie wrote: so would they still be 3.7s like WTs ??? meaning hed be better off running his 3.9 centres and stock NT flanges in his rig.
X2. If you don't have new perch's just cut the n/t housing's through the axle tube to save the perch's, once off the housing's you can take your time to not cut into em. The n/t rh front is different to w/t, so that one is handy to keep.. |
|
| Author: | coneykid [ Thu Jul 01, 2010 2:21 am ] |
| Post subject: | Re: wt into nt |
sorry, been away. thanks for help |
|
| Author: | lauby [ Thu Jul 01, 2010 2:53 am ] |
| Post subject: | Re: wt into nt |
steknig wrote: The n/t rh front is different to w/t, so that one is handy to keep..
Soo, do any after market kits have an odd one included to suit ? Just a matter of polishin one with the grinder I s'pose. |
|
| Author: | Fatzook [ Thu Jul 01, 2010 3:26 am ] |
| Post subject: | Re: wt into nt |
lauby wrote: steknig wrote: The n/t rh front is different to w/t, so that one is handy to keep.. Soo, do any after market kits have an odd one included to suit ? Just a matter of polishin one with the grinder I s'pose. You have PM |
|
| Author: | steak_knife [ Thu Jul 01, 2010 6:44 am ] |
| Post subject: | Re: wt into nt |
Fatzook wrote: lauby wrote: steknig wrote: The n/t rh front is different to w/t, so that one is handy to keep.. Soo, do any after market kits have an odd one included to suit ? Just a matter of polishin one with the grinder I s'pose. You have PM How did you know??  
|
|
| Author: | Fatzook [ Thu Jul 01, 2010 6:48 am ] |
| Post subject: | Re: wt into nt |
steknig wrote: Fatzook wrote: lauby wrote: steknig wrote: The n/t rh front is different to w/t, so that one is handy to keep.. Soo, do any after market kits have an odd one included to suit ? Just a matter of polishin one with the grinder I s'pose. You have PM How did you know?? I'm that good
|
|
| Author: | steak_knife [ Thu Jul 01, 2010 6:50 am ] |
| Post subject: | Re: wt into nt |
Fatzook wrote: steknig wrote: Fatzook wrote: lauby wrote: steknig wrote: The n/t rh front is different to w/t, so that one is handy to keep.. Soo, do any after market kits have an odd one included to suit ? Just a matter of polishin one with the grinder I s'pose. You have PM How did you know?? I'm that full of my self Fixed it..
The r/h side is different because it sits under the pumpkin.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|